Your Pixel Watch can do things no other Android smartwatch can—don’t miss out


Not all Android smartwatches are created equal. The Pixel Watch has a few exclusive features that you won’t find on a Galaxy Watch or any other Wear OS device. If you have one on your wrist, you should be sure to know the benefits.

“At a Glance” on your watch face

The iconic Pixel widget is for watches, too

Pixel phones—more specifically, the Pixel Launcher—have long featured an ever-present widget on the home screen called “At a Glance.” It dynamically updates with relevant information, such as upcoming calendar events, flights, sports scores, travel times, and more. When nothing pertinent is happening, it defaults to weather information.

A slimmed-down version of this widget is available as a watch face complication on the Pixel Watch. It used to be restricted to the extra-wide complication slot, but now it can be added anywhere. The watch version of the widget mainly shows time until your next calendar event, reminders for when to leave for events, flight information, and weather. Simply choose “At a Glance” from the complication picker when customizing a watch face.

Use Gemini without wake commands or buttons

“Raise to Talk” to your digital assistant

There are multiple ways to launch Gemini on a Wear OS smartwatch. All devices can activate it by saying “OK Google” or mapping it to one of the hardware button shortcuts. The Pixel Watch 4 has one extra method: “Raise to Talk.”

The feature works essentially as it sounds. Rather than pressing a button or using a wake command, you can simply raise the Pixel Watch 4 to your face and start talking to Gemini. You’ll notice Gemini’s blue glow appear at the bottom of the screen when it’s ready to listen.

To enable, go to Settings > Gestures > Raise to Talk. Toggle it on and play around with the sensitivity settings for both the gesture and voice. You can even turn off the visual indicator if you’d like.

Pixel Watch 4

Heart Rate Monitor

Yes

Color Screen

Yes


Google Wallet Express Pay

Tap to pay even faster

On your phone, you can tap to pay by simply unlocking the screen—you don’t have to manually open the Google Wallet app. Historically, that’s not how it has worked for Wear OS devices. You were required to manually launch Google Wallet before tapping the terminal.

Earlier this year, the Pixel Watch improved this process with a feature called “Express Pay.” When enabled, you can tap to pay without opening Google Wallet first. Your Pixel Watch screen simply needs to be unlocked, which only needs to be done once every time you put it on your wrist.

Express Pay has to be enabled from the Pixel Watch app on your phone. Go to Google > Google Wallet > Select your default card > Express pay > Toggle it on and select “Tap to pay and transit.”

Full remote camera control

More than switching between photo and video

Most Wear OS devices have some sort of ability to remotely control the phone’s camera. With a Galaxy Watch and Galaxy phone, you can switch between photo or video mode, enable or disable the timer, and use the bezel to zoom in or out. That’s it, though.

Meanwhile, a Pixel Watch connected to a Pixel phone essentially has full access to the camera controls. You can switch between photo and video mode, swap from rear to front camera, adjust zoom, choose timer length, and select from various modes: Night Sight, portrait, slow motion, time lapse, and even cinematic blur for videos.

Most of these controls are accessible through the on-screen buttons, but swapping from front and rear cameras requires double-tapping the screen. That’s all there is to it.


Take advantage of your perks

“Exclusive” features weren’t always a part of Android smartwatches. There was a time when they all had the exact same interface and basic set of features (it was called “Android Wear”). When Samsung finally adopted Wear OS in 2021, the platform became more like Android on phones—manufacturer-specific features and UIs included. For better or worse, your Pixel Watch has advantages—use them.


Pixel 10 with glowing Google G logo


The 4 most useful Google Pixel features that aren’t enabled by default

Google takes a “minimal” approach to Pixel phones, but don’t make the mistake of thinking all the best features are all available right out of the box. There’s some good stuff just waiting to be discovered, and Google doesn’t do the best job of telling you about it.



Source link

Leave a Reply

Subscribe to Our Newsletter

Get our latest articles delivered straight to your inbox. No spam, we promise.

Recent Reviews


1,000W, 10-port charger for $45... predictably disappointing.

1,000W, 10-port charger for $45… predictably disappointing. 

Adrian Kingsley-Hughes/ZDNET

Follow ZDNET: Add us as a preferred source on Google.


ZDNET’s key takeaways

  • Things that look “too good to be true” invariable are just that.
  • This example got dangerously hot in a short period of time before dying. 
  • There’s no legitimate charger that comes close to delivering on the 1,000W promise.

Being a tech reviewer for a living means that I get offered some very interesting things. Not interesting as in Bugatti supercars or jewel-encrusted Fabergé eggs, but interesting as in “this thing could easily be a fire hazard — want to take a look?”

Also: The best GaN chargers of 2026: Expert tested

Submissively, I often say yes. And I’m glad I did with the most recent pitch, because it was very interesting indeed.

Meet the “interesting” charger

This time around, the thing of interest was a charger that claimed to deliver an incredible 1,000W through its ten ports — four 140W USB-C ports, four 100W USB-C ports, and two 20W USB-A ports. 

The person who bought this charger told me that they’d plugged it in, used it to charge their phone for “a few minutes,” got worried when it became “a little hot,” and unplugged it.

That's a lot of promise... but (spoilers), they don't deliver!

That’s a lot of promise… but (spoilers), they don’t deliver!

Adrian Kingsley-Hughes/ZDNET

The unit was suspiciously light and plasticky, especially given its built-in power supply. Compare this to Ugreen’s Nexode 500W charger, which weighs a hair under 5 lb.

There was also a slight whiff of melty plastic, which made me think that this had been a bit more than a little hot. 

Also: This $4 router reboot timer is the cheap internet fix I didn’t know I needed – and it works reliably

Color me suspicious, but I had a gut feeling that the only way this charger would be able to push out 1,000W would be if it caught fire. 

Turns out I wasn’t far wrong.

How long would it last? Answer: Minutes

Talk is cheap. It was time to test the charger. 

So I plugged it in, turned it on, and started using it. Within a couple of minutes of starting to use it, I noticed a few things:

  • No matter what I tried, I couldn’t persuade the charger to deliver more than about 60W from any of the ports. 
  • As for peak output, I managed to get close to 250W.
  • The power output was very uneven and noisy, fluctuating wildly. The more ports I used, the worse it got.
  • The unit got very hot to the touch very quickly, even under light loads. 
  • But… before I could get the thermal camera out to check how hot it got, there was a pop and the unmistakable smell of “Magic Smoke.” The charger had been sent to Silicon Heaven within minutes.

Annnnd… POP! This is the moment the charger gave up the ghost.

Adrian Kingsley-Hughes/ZDNET

Diagnosis time

Time to take it apart and have a look inside. For an item that plugged into the mains power, this unit was shockingly easy to take apart. 

A thin sheet of easily removable plastic is a that separates curious hands from live AC power.

A thin sheet of easily removable plastic is a that separates curious hands from live AC power.

Adrian Kingsley-Hughes/ZDNET

And even unplugged and broken, it was capable of delivering zaps! If the case came off while this was plugged into an outlet, it could very easily be deadly.

There’s charge still in some of the capacitors, and these could deliver quite a zap despite the unit being broken and unplugged!

Adrian Kingsley-Hughes/ZDNET

After getting inside, the unit was filled with a grey goo that I’d seen in a previous disappointing charger I’d taken apart. This is a thermal paste that’s used to try to dissipate the heat generated by the components. 

It’s not really going to work because it’s sealed in a plastic box with no effective heatsink. It’s a token gesture at best. At worst, it creates a mass that’ll slowly heat up and hold temperature because it’s got no way to get rid of it.

Behold the grey goo!

Adrian Kingsley-Hughes/ZDNET

Next to this goo was a bank of capacitors — the black cylinders in the photo — which were the cause of the failure. They’d clearly overheated, with three of them showing signs of bulging.

The problem!

Adrian Kingsley-Hughes/ZDNET

Well there’s the problem!

I also noticed that two of the components — bridge rectifiers that are used to turn AC mains into DC — have been fixed on an angle to make the touch a metal heatsink. It’s not really an effective way to cool down components.

The bottom line

Another “too good to be true” device bites the dust. It’s not the first one I’ve come across, and it won’t be the last.

Moral of the story here is that manufactures are using big number marketing — in this case 1,000W and masses of ports — to scalewash poor quality products. 

This might be a half-decent product if it was built to deliver 100W, but there’s no end of competition at that end of the market. Silkscreen “1,000W” on the outside, sprinkle in a few reviews that feel scripted and fake, and all of a sudden it’s interesting and exciting… right up until it blows up. 

Also: My top 7 laptop-bag essentials now, after decades of remote work

I know of no 1,000W charger. In fact, the 500W Ugreen Nexode is the highest-power charger that I’ve tested that’s legit. And the price is also legit — $250. 

But it’s built to deliver on what it promises and is packed with safety features, including “tip-over protection,” which cuts the output when the unit tips over and prevents it from falling on its side, where it can’t dissipate heat effectively. Now that’s an attention to safety that I like to see in a product that handles that much power. 

But if you want 1,000W of output, you’ll have to buy two and duct tape them together.





Source link