Why every soundbar I owned sounded flat, and how a cheap stereo system fixed it


I’ve owned a few soundbars over the years, most with a subwoofer, and they always felt like the right choice. They look clean, save space, and sound decent enough at first. But after going through three different setups, I realized I didn’t actually like how they sounded. No matter the brand, they all felt a little thin and, at times, lifeless. I tried swapping in better subs to fix it, but it never really got me where I wanted.

So I went in a completely different direction. I found a used stereo setup on Facebook Marketplace that included a Sony receiver, two Polk Audio tower speakers, and a subwoofer for $150. After setting it up, the difference was immediate. The sound was bigger, fuller, and much closer to what I’d been missing the whole time.

Why my soundbars always felt thin

Everything came from one place, and it never filled the room

Vizio V21d-J8's LED status lights on the front of the soundbar
Justin Duino / Review Geek

I don’t think soundbars are bad, but they always felt like they were fighting their own design. You’re cramming multiple channels into a single bar under your TV, and there’s only so much separation and depth you can get from that. Even with a subwoofer handling the low end, everything else is still coming from basically the same place. As a musician, sound matters to me, and this always felt a little off.

That’s what kept bugging me. Dialogue was clear enough, and bass was fine once I added a decent sub, but overall the sound was flat. There wasn’t much sense of space or movement, especially in movies. Everything blended together instead of spreading out, and once I noticed it, I couldn’t unhear it.

What soundbars get right, and why I still moved on

They’re convenient, but convenience only goes so far

Bose Smart Soundbar 300 Credit: Bose

I get why soundbars are so popular. They’re easy to set up, don’t take over your living room, and sound much better than your TV’s built-in speakers. For many people, that’s more than enough, especially in a smaller space. You plug one in, pair the sub, and you’re done. No receiver, no speaker wire, no tweaking.

Screenshot 2024-07-09 at 9.18.14 AM

Control Method

Remote

Brand

JBL

Delivering Dolby Atmos Surround Sound and true customization, the JBL Bar 700 series is an all-in-one sound solution. Place the subwoofer and detach the ends for surround sound, or keep the satellites attached for room-filling noise from an extended soundbar. 


That said, I eventually hit a point where convenience wasn’t enough to make up for the sound. Even the better ones I tried never gave me that sense of space or fullness I was looking for, especially when I compared them to the studio monitors and sub in my studio. They sounded good for what they are, but I kept feeling like I was compromising. Once I came to terms with that, it was hard to justify staying with something that fell short of what I actually wanted.

Separate speakers made all the difference

I wasn’t looking to spend a lot of money on this; I just wanted to try something different. That’s when I came across a used setup on Facebook Marketplace: a Sony stereo receiver, two Polk Audio tower speakers, and a subwoofer for $150. At that price, it felt like a no-brainer. When I picked it up, everything was in great shape, so even if it wasn’t perfect, it was worth taking a shot.

A soundbar and two speakers next to it.


How to Create Immersive Surround Sound in Small Living Spaces

Unlimited sound power, itty-bitty living space.

After setting it up, the difference was obvious. The sound didn’t just get louder; it actually filled the room. With the speakers spaced apart, everything had more separation and depth, and it finally felt like audio was coming from around the TV instead of directly under it. The tower speakers also have multiple drivers, so they’re handling a wider range of sound than a single soundbar ever could. Music sounded more alive, and movies sounded bigger than any of my previous soundbars. It wasn’t subtle; it was the kind of upgrade you notice right away.

The downsides, and how I fixed them for cheap

More gear and wires, but easy workarounds

This setup isn’t as clean or compact as a soundbar. I had to clear off some shelf space under my TV for the receiver, and the tower speakers definitely take up more room on the floor. It’s not a huge deal, but it’s something you notice right away if you’re used to the simplicity of a single bar under your TV or you’re working with a smaller space.

The bigger issue for me was the subwoofer placement. I like having it sitting behind our chairs across the room from the TV, which usually means running a long cable or going through the attic and wall. I wasn’t about to deal with that. After a little digging, I found a wireless speaker adapter that solved the problem for cheap (on sale for $30). Now I can place the sub pretty much anywhere in the room as long as there’s an outlet. It works with anything that uses RCA, so I wasn’t limited to just the subwoofer. No fishing wires required. So, all in, I’m at about $180, which is right in line with what you’d pay for an inexpensive soundbar with a subwoofer.


A better sound without spending a fortune

At the end of the day, I’m just a lot happier with how everything sounds now. It’s fuller, bigger, and actually feels like it fills the room, which is what I was chasing all along. And the best part is I didn’t have to spend a ton of money to get there.

If your soundbar has always felt a little underwhelming, this is absolutely worth considering. You don’t need to go all-in on an expensive setup; there are plenty of solid used options that can deliver a much better experience for the same price or less.



Source link

Leave a Reply

Subscribe to Our Newsletter

Get our latest articles delivered straight to your inbox. No spam, we promise.

Recent Reviews


The battle between AMD and NVIDIA rages on eternally, it seems, though it’s rather a one-sided battle in the desktop PC market, where NVIDIA holds something like 95%, and AMD most of what’s left apart from Intel’s (almost) 1%.

But as dominant and popular as NVIDIA is, AMD proponents could always raise the value argument. On a per-dollar basis, you get more value with an AMD card, and even better, you have the benefit of AMD “FineWine” which ensures your card will become even better with time.

What “FineWine” meant—and why it mattered

FineWine was something that AMD fans began to notice during the GCN (Graphics Core Next) architecture. Incidentally, the last AMD dedicated GPU I bought was the R9 390, which was of that lineage. Since then, all my AMD GPUs have been embedded in consoles or handheld PCs, but I digress.

The R9 390 is actually a good example of FineWine. Launched in 2015, like many AMD cards, the R9 390 had a rough start, and I sold mine in exchange for a stopgap card in the form of the RTX 2060, because I wanted to play Cyberpunk 2077 on PC, where it wasn’t broken the way it was on consoles. Even though, on paper, the raw power of the RTX 2060 wasn’t much more than a 390, the AMD card’s performance on my (then) 1080p monitor was a stuttery mess, whereas everything suddenly ran great on my 2060 the minute the AMD GPU was expunged from the system.

But, a decade later, that same game is perfectly playable on this card, as you can see in this TechLabUK video.

A lot of it is because the developers have kept patching and improving the game, but this is something you see across the board for AMD cards on various games. This is FineWine. Years later, with continued driver updates from AMD, the cards go from being a little worse than their NVIDIA equivalent at launch to being as good or even a little better in the long run.

Of course, that’s not super helpful to customers who buy hardware at launch, but it has given some AMD users computers with longer lifespans than you’d think, and made many used AMD cards an even better bargain.

Why AMD’s FineWine era worked

A bit of smoke and mirrors

The PULSE AMD Radeon RX 6800 XT next to an AMD RX 6600 XT Phantom Gaming D. Credit: Ismar Hrnjicevic / How-To Geek

FineWine wasn’t magic, of course. The phenomenon was the result of a mix of factors. AMD’s architectures were in some cases a little too forward-thinking for the APIs of the day. Massively parallel with a focus on compute, they’d only come into their own with DirectX 12 and more modern games. NVIDIA’s cards at the time were better optimized to run current games well. Over time, NVIDIA cards would make similar architectural changes, but with better timing.

The other reason FineWine was a thing came down to driver maturity. As a much smaller company with fewer resources, it seems that AMD had some trouble releasing cards with optimized drivers. So, over time, the card would start performing as intended.

In both cases, you could frame FineWine not as the card getting better, but rather getting “less worse” over time. If you set the bar low at launch, the only way is up. However, there’s a third factor to take into account as well. AMD dominates console gaming. The two major home console series have now run on AMD GPUs for two generations, and so games are developed with that hardware in mind. This also gives newer titles a bit of a leg up, though it’s hard to know exactly by how much.

How AMD moved on from FineWine

It seems worse, but it’s actually better

An AMD RX 9070 XT Gigabyte gaming graphics card. Credit: Ismar Hrnjicevic / How-To Geek

With the shift to RDNA architecture, AMD made a deliberate change in philosophy. Modern Radeon GPUs are designed to perform well right out of the gate. Reviews on day one are much closer to what you could expect years later. There are still decent gains to be had on RDNA cards with game-specific optimizations (Spider-Man on PC is a great example), but the golden age of FineWine seems to be in the past now.

That’s a good thing! Products should put their best foot forward on day one, so let’s not shed a tear for FineWine in that regard. So it’s not so much that AMD doesn’t care about improving the performance and stability of older cards over the years, it’s that the company is now better at its job, and so there’s less room for improvement.

Sapphire NITRO+ AMD Radeon RX 9070 XT GPU

Cooling Method

Air

GPU Speed

2520Mhz

The AMD Radeon RX 9070 XT from Sapphire features 16GB of DDR6 memory, two HDMI and two DisplayPorts, and an overengineered cooling setup that will keep the card cool and whisper quiet no matter the workload.


NVIDIA kept the idea—but changed the formula

It’s all about AI

It’s funny, but these days I think of NVIDIA cards as the ones with major longevity. Take the venerable GTX 1080 and 1080 Ti cards. These cards only lost game-ready driver support in 2025, which doesn’t immediately make them useless, it just means no more optimization for those chips. What an incredible run, getting a decade of relevant game performance from a GPU!

But, that’s not really NVIDIA’s take on FineWine. Instead, the company has taken to adding new and better features to its cards long after they’ve been launched. Starting with the 20-series, the presence of machine-learning hardware means that by improving the AI algorithms for technologies like DLSS, these cards have become more performant with better image quality over time.

While NVIDIA has made some features of its AI technology exclusive to each generation, so far all post 10-series GPUs benefit from every new generation of DLSS. Compare that to AMD which not only offers inferior versions of this new upscaling technology, but has locked the better, more usable versions to later cards, such as the case with FSR Redstone.


FineWine is an ethos, not a brand

In the case of my humble RTX 4060 laptop, the release of DLSS 4.5 has opened new possibilities, notably the ability to target a 4K output resolution, which was certainly not on the table when I first took this computer out of the box. We might not call it “FineWine,” but it sure smells like it to me!



Source link