Shell may be synonymous with oil and gas, but it’s still hoping to lead the way with electric cars. The company has previewed a Triple 10 Challenge Concept Car that it hopes will set new standards for EV charging, efficiency, and climate-friendliness.
The compact SUV is intended to meet the three goals of its namesake Triple 10 Challenge. It should charge from 10% to 80% in under 10 minutes, achieve efficiency of 10km (6.2 miles) per kilowatt-hour, and offer a lifetime CO2 impact of 10 metric tons (about 9.8 imperial tons).
The fast charging will come by immersing the battery cells in non-conductive cooling fluid that’s better at distributing heat, improving both sustained charging speeds and overall efficiency. That, in turn, lets Shell use a lower-capacity battery to save weight without compromising on range.
Mobility VP Cara Tredget tells Auto Express that the company is aiming for a weight under 1,000 kg (about 2,204 lbs.), making it far lighter than the 3,500 lbs. to 5,000 lbs. you typically see for smaller EVs.
Will Shell sell its EV concept?
Don’t expect a production model
Shell Triple 10 Challenge Concept Car EV sketch.Credit: Shell
Shell will fully reveal the Triple 10 Challenge Concept Car in June, and has already shared a sketch (shown here). This will be a fully drivable EV. It won’t be a clay model or a demo-only design.
However, Shell has already noted that it won’t make a production version. As Tredget explains, the concept exists to show what can be done with technologies that are “available and scalable now,” rather than relying on exotic or unrealized breakthroughs.
Companies like Tesla and Mercedes are already using immersion cooling in vehicles like the Semi truck and AMG GT 63 S E-Performance hybrid. Chinese manufacturers like BYD have already designed batteries that can charge in as little as five minutes, and solid-state batteries also promise to cut charging times even as they reduce weight. However, those technologies are either in limited use or are still on the horizon.
The Shell concept car theoretically encourages automakers to think differently, lowering EV costs and spurring adoption.
Do you really benefit from the tech you are shelling out more to have?
Why does Shell care about EVs?
It’s good for business in the long run
Credit: Bertel King / How-To Geek
It may seem odd for Shell to devote attention to EVs. Its revenues are still heavily dependent on oil. $31.6 billion of its $56.1 billion in 2025 adjusted EBITDA (earnings before interest, taxes, depreciation, and amortization) came from the combination of oil extraction and chemical production.
However, Shell also has growing businesses in charging, EV lubricants, and renewable electricity. The energy giant knows that electric cars and zero-emissions power are gathering momentum despite some rough markets, with certain countries and regions expecting to phase out combustion engine car sales as soon as 2035. The Triple 10 Challenge Concept Car could help boost sales across these categories and ensure that Shell is ready when oil is less vital.
The right concept at the right time
Shell also has incentives to promote EVs even if its oil business fares well. Its revenues have been highly volatile as the COVID-19 pandemic, the conflict in Iran, and other issues have led to large oil price changes. Electric cars and their infrastructure could provide a relatively stable income source.
Most of the time your NAS is sitting on the shelf, quietly storing whatever files you send to it. However, most NASes can do more than just back up your data, especially if they have free USB ports. These are some helpful ways you can get some extra use out of your NAS.
Use an external drive for real backups
Not all backups should live inside your NAS
It is tempting to look at your expensive NAS and think that it is all the backup solution you need. Unfortunately, it isn’t.
Proper mirroring, like you can get through RAID, can protect against a single disk failure, but it does nothing to protect you against accidental deletions, ransomware, file corruption or a catastrophic event, like a tumble off a shelf.
When all of your backups rely on a single system in one location, you’re setting yourself up for failure.
That is where your NAS’s USB port comes in. If you plug in an external drive into your NAS to create another backup, you get a true, isolated backup. Most NAS operating systems make this easy: just schedule jobs to copy important files over whenever the drive is connected.
Quiz
8 Questions · Test Your Knowledge
Network Attached Storage (NAS)
From basement file servers to enterprise data vaults — test how much you really know about NAS technology.
HistoryHardwareUse CasesProtocolsSecurity
Which company is widely credited with introducing one of the first commercially successful NAS appliances in the early 1990s?
Correct! Auspex Systems released the NS3000 in 1989, widely regarded as one of the earliest dedicated NAS appliances. They pioneered the concept of a standalone file server accessible over a network, laying the groundwork for the modern NAS industry.
Not quite. The answer is Auspex Systems, which launched one of the first dedicated NAS appliances — the NS3000 — back in 1989. While companies like Synology and QNAP are household names today, Auspex was breaking new ground decades before them.
Which network file sharing protocol is primarily used by NAS devices to serve files to Windows-based clients?
Correct! SMB (Server Message Block) is the dominant protocol for file sharing with Windows clients. Originally developed by IBM and later popularized by Microsoft, SMB is what allows Windows machines to seamlessly browse and access NAS shares as if they were local drives.
Not quite. The answer is SMB (Server Message Block). NFS is the protocol of choice for Linux and Unix clients, iSCSI is used for block-level storage, and FTP is a general file transfer protocol not optimized for seamless file system integration.
What does the RAID level ‘5’ specifically require as a minimum number of drives to function?
Correct! RAID 5 requires a minimum of three drives. It stripes data and parity information across all drives, meaning it can tolerate the failure of one drive without any data loss — making it a popular choice for NAS users who want a balance of performance, capacity, and redundancy.
Not quite. RAID 5 requires a minimum of three drives. The parity data distributed across all drives allows one drive to fail without losing data. RAID 1 only needs two drives, while RAID 6 requires four — so options vary depending on your redundancy needs.
What is ‘media server’ functionality on a NAS most commonly used for in a home environment?
Correct! Media server functionality — often powered by software like Plex, Emby, or Jellyfin running on the NAS — allows you to stream your locally stored media collection to TVs, phones, tablets, and more. It essentially turns your NAS into a personal Netflix for your own content library.
Not quite. The core use of a NAS media server is streaming locally stored movies, music, and photos to other devices on your network. Software like Plex or Jellyfin handles the heavy lifting, including transcoding video on the fly for devices that need it.
What is the ‘3-2-1 backup rule’ that NAS users are often advised to follow?
Correct! The 3-2-1 rule means: keep 3 total copies of your data, store them on 2 different types of media (e.g., NAS and external drive), and keep 1 copy in an offsite or cloud location. This strategy protects against hardware failure, theft, fire, and other disasters that could wipe out local backups.
Not quite. The 3-2-1 rule stands for: 3 copies of your data, stored on 2 different media types, with 1 copy kept offsite. It’s a best-practice framework designed to ensure your data survives almost any disaster scenario, from a failed hard drive to a house fire.
Which protocol allows a NAS to present storage to a computer as if it were a locally attached block device, rather than a file share?
Correct! iSCSI (Internet Small Computer Systems Interface) transmits SCSI commands over IP networks, allowing a NAS to present raw block storage to a host computer. The computer then formats and manages that storage like a local disk — making iSCSI ideal for virtual machines and databases that need low-level disk access.
Not quite. The answer is iSCSI. Unlike SMB or NFS, which share files over a network, iSCSI exposes raw block storage — the host computer sees a NAS volume as though it were a physically attached hard drive, which is critical for workloads like virtual machine datastores.
Which of the following best describes a ‘surveillance station’ use case for a NAS?
Correct! Many NAS brands — including Synology and QNAP — offer dedicated surveillance station software that turns the NAS into a Network Video Recorder (NVR). It can connect to multiple IP cameras, record footage continuously or on motion detection, and store months of video locally without a subscription fee.
Not quite. A surveillance station on a NAS refers to software that connects to IP security cameras, records video footage, and stores it locally. This makes a NAS a powerful and cost-effective alternative to cloud-based security systems, since you own and control all your recorded footage.
Synology, one of the most recognized NAS brands today, was founded in which year and country?
Correct! Synology was founded in Taiwan in 2000 and has grown into one of the most beloved NAS manufacturers in the world. Their DiskStation Manager (DSM) operating system is frequently praised for its polished interface and rich feature set, making Synology a top choice for both home users and businesses.
Not quite. Synology was founded in Taiwan in 2000. Taiwan has become a major hub for NAS hardware development, with competitors like QNAP also headquartered there. Synology’s DiskStation Manager software helped set the standard for what a user-friendly NAS experience could look like.
Challenge Complete
Your Score
/ 8
Thanks for playing!
And you don’t have to stop there. You can rotate multiple drives, one drive for daily or weekly backups and another stored somewhere safe. That gives you extra protection against malware, power surges, and bad luck. It’s not fancy, but it’s one of the most important things you can do with your NAS.
Stop treating your external drive like a backup dumping ground
Connect your NAS to an uninterruptible power supply
A UPS can save you from data corruption
Credit: Patrick Campanale / How-To Geek
NAS devices are built for 24/7 operation, so they’ll eventually experience a power outage or a power surge. That can be a problem for your data.
If your NAS loses power suddenly, you’re at risk of file system corruption, incomplete writes, and in a worst case scenario, total data loss.
An uninterruptible power supply keeps your NAS powered on for a short while during an outage, and if you connect them via USB, they can even exchange data. That link lets the NAS detect that power has gone out, monitor power levels, and shut itself down cleanly before the battery dies.
Without that USB connection, the NAS will just crash when the UPS finally dies.
If you’re using your NAS as a major part of your backup strategy, a small UPS that can connect over USB is definitely worthwhile.
Get a new network adapter
2.5Gb Ethernet or Wi-Fi on demand
Credit: Patrick Campanale / How-To Geek
Older or lesser NAS devices often have 1 gigabit Ethernet ports, while your drives and network could do better. Your NAS’s USB port might enable you to upgrade without replacing the whole unit.
Many NAS devices will allow you to connect a USB-to-2.5 gigabit Ethernet adapter to use instead of the built-in port. If you have SSDs, you’ll definitely be able to make use of the faster speeds offered by 2.5 gigabit Ethernet, since 1 gigabit tops out at about 125 megabytes per second. Even SATA SSDs can reach speeds of about 500 megabytes per second, and NVME SSDs can get well into the gigabyte per second range.
If you’re exclusively using mechanical hard drives, the benefit isn’t quite as clear-cut. Whether you’d benefit depends on how fast your drives are and how you have them configured.
There’s also a niche but useful option: USB Wi-Fi adapters. They’re not meant to replace Ethernet permanently, but they can be handy for temporary setups, troubleshooting network issues, or emergency access when wired connectivity fails.
You’ll need to confirm that your NAS supports USB Ethernet dongles—most do, but there are some that don’t.
Turn it into a print server
Give your old printer a new lease on life
Credit: Patrick Campanale / How-To Geek
USB-only printers are largely a thing of the past, since they were tied to one computer. Most modern printers connect to the Wi-Fi network instead, so they can be placed anywhere.
If your old USB printer is still going strong, you can use your NAS as a print server.
The setup is usually quite easy, but it’ll depend on your NAS.
Many have a setting that allows you to enable print sharing. In that case, all you need to do is plug the printer into the NAS, enable print sharing, and every device on your network can use it. Alternatively, you may need to install a specific app that allows you to use your NAS as a print server.
This is especially useful if you have a reliable older printer with no built-in networking, you don’t want to replace the hardware, and you only need occasional printing without extra hassle. It may not be the most exciting use of a NAS USB port, but it’s one of the most practical.
Your NAS may be even more customizable
Depending on your specific NAS, you may be able to do even more than this. Some of them allow you to run lightweight services for your home network, like a mini home lab, and some allow you to use a completely different operating system. If that is the case, there are a ton of ways to put your NAS to use.
8/10
CPU
Intel N95
Memory
8GB DDR5
Drive Bays
4x M.2 NVMe
Ports
5Gb/s Ethernet, USB-A, USB-C, HDMI 2.b
The TerraMaster F4 SSD is an all-SSD NAS that supports up to four 8TB NVMe drives. Shipping with 8GB of DDR5 RAM and the Intel N95 processor, this NAS actually can be user-upgraded with up to 32GB of DDR5 RAM. The onboard 5Gb/s Ethernet port supports 2.5Gb/s and 1Gb/s networking too, plus there are USB 3 10Gb/s Type-A and Type-C ports on the back for plugging in other peripherals, like hard drives or SSDs.
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
