Australian government warns doctors over AI scribing tools as privacy and safety concerns grow


The Australian government is urging healthcare professionals to exercise caution when using AI-powered medical scribing tools, as regulators examine whether stronger safeguards are needed around one of healthcare’s fastest-growing technologies, according to a report by The Guardian.

AI scribes have rapidly gained popularity by recording, transcribing, and summarising doctor-patient conversations into clinical notes, reducing the administrative burden on healthcare workers. However, government officials now warn that the technology’s rapid adoption has outpaced oversight, raising questions around patient privacy, informed consent, and the accuracy of medical records.

Australia’s AI scribe boom is now attracting regulatory scrutiny

According to documents obtained by The Guardian Australia through freedom of information requests, Australia’s federal health department has identified several risks associated with AI scribing tools. Briefing papers prepared for Senate Estimates in February 2026 describe the technology as having “little oversight” and note that some AI scribes are marketed as operating outside existing medical device regulations despite being used in clinical settings.

The concerns come as adoption continues to surge. An online survey conducted by the Royal Australian College of General Practitioners (RACGP) found that the proportion of Australian doctors using AI scribes nearly doubled from 22 percent in August 2024 to 40 percent by November 2025. Technology providers also claim their platforms have processed hundreds of millions of consultations globally over the past 18 months.

While the health department acknowledges that AI scribes could improve clinician productivity and help reduce burnout, it also warns that these tools inherit many of the same limitations as large language models. Errors in transcription or summarisation could affect patient safety, clinical accountability, and the quality of information stored in Australia’s digital health infrastructure.

Privacy has emerged as another major concern

Officials found that some providers promote their products as privacy compliant while offering limited transparency about how patient information is processed. In some cases, healthcare providers may not even realise patient data is being transmitted to cloud servers outside Australia, potentially exposing sensitive medical information to additional risks.

The department also questioned marketing claims suggesting AI scribes can increase doctors’ revenue by around 30 percent without extending working hours or seeing more patients. Officials noted that such claims could have broader implications for Australia’s publicly funded Medicare system if higher billing becomes a primary incentive for adoption.

Patient consent is another area drawing attention. The government found significant variation in how clinics obtain permission before recording consultations, arguing that meaningful informed consent requires patients to understand both the benefits and limitations of AI-assisted documentation. Consumer groups have similarly reported instances where patients were told they would need to find another healthcare provider if they declined to have AI scribes used during appointments.

The regulatory landscape remains fragmented. Oversight is currently shared between the Therapeutic Goods Administration (TGA), the Australian Health Practitioner Regulation Agency (Ahpra), and the Office of the Australian Information Commissioner. The TGA is currently reviewing whether AI scribes should be formally classified as medical devices, a decision that could bring many platforms under stricter regulatory oversight. A report is expected in the coming months.

The debate reflects a broader challenge facing healthcare systems worldwide. AI tools are increasingly capable of reducing paperwork and giving doctors more time with patients, but governments are also being forced to balance those efficiency gains against the need to protect patient privacy, ensure clinical accuracy, and establish clear accountability when artificial intelligence becomes part of medical decision-making.



Source link

Leave a Reply

Subscribe to Our Newsletter

Get our latest articles delivered straight to your inbox. No spam, we promise.

Recent Reviews


1,000W, 10-port charger for $45... predictably disappointing.

1,000W, 10-port charger for $45… predictably disappointing. 

Adrian Kingsley-Hughes/ZDNET

Follow ZDNET: Add us as a preferred source on Google.


ZDNET’s key takeaways

  • Things that look “too good to be true” invariable are just that.
  • This example got dangerously hot in a short period of time before dying. 
  • There’s no legitimate charger that comes close to delivering on the 1,000W promise.

Being a tech reviewer for a living means that I get offered some very interesting things. Not interesting as in Bugatti supercars or jewel-encrusted Fabergé eggs, but interesting as in “this thing could easily be a fire hazard — want to take a look?”

Also: The best GaN chargers of 2026: Expert tested

Submissively, I often say yes. And I’m glad I did with the most recent pitch, because it was very interesting indeed.

Meet the “interesting” charger

This time around, the thing of interest was a charger that claimed to deliver an incredible 1,000W through its ten ports — four 140W USB-C ports, four 100W USB-C ports, and two 20W USB-A ports. 

The person who bought this charger told me that they’d plugged it in, used it to charge their phone for “a few minutes,” got worried when it became “a little hot,” and unplugged it.

That's a lot of promise... but (spoilers), they don't deliver!

That’s a lot of promise… but (spoilers), they don’t deliver!

Adrian Kingsley-Hughes/ZDNET

The unit was suspiciously light and plasticky, especially given its built-in power supply. Compare this to Ugreen’s Nexode 500W charger, which weighs a hair under 5 lb.

There was also a slight whiff of melty plastic, which made me think that this had been a bit more than a little hot. 

Also: This $4 router reboot timer is the cheap internet fix I didn’t know I needed – and it works reliably

Color me suspicious, but I had a gut feeling that the only way this charger would be able to push out 1,000W would be if it caught fire. 

Turns out I wasn’t far wrong.

How long would it last? Answer: Minutes

Talk is cheap. It was time to test the charger. 

So I plugged it in, turned it on, and started using it. Within a couple of minutes of starting to use it, I noticed a few things:

  • No matter what I tried, I couldn’t persuade the charger to deliver more than about 60W from any of the ports. 
  • As for peak output, I managed to get close to 250W.
  • The power output was very uneven and noisy, fluctuating wildly. The more ports I used, the worse it got.
  • The unit got very hot to the touch very quickly, even under light loads. 
  • But… before I could get the thermal camera out to check how hot it got, there was a pop and the unmistakable smell of “Magic Smoke.” The charger had been sent to Silicon Heaven within minutes.

Annnnd… POP! This is the moment the charger gave up the ghost.

Adrian Kingsley-Hughes/ZDNET

Diagnosis time

Time to take it apart and have a look inside. For an item that plugged into the mains power, this unit was shockingly easy to take apart. 

A thin sheet of easily removable plastic is a that separates curious hands from live AC power.

A thin sheet of easily removable plastic is a that separates curious hands from live AC power.

Adrian Kingsley-Hughes/ZDNET

And even unplugged and broken, it was capable of delivering zaps! If the case came off while this was plugged into an outlet, it could very easily be deadly.

There’s charge still in some of the capacitors, and these could deliver quite a zap despite the unit being broken and unplugged!

Adrian Kingsley-Hughes/ZDNET

After getting inside, the unit was filled with a grey goo that I’d seen in a previous disappointing charger I’d taken apart. This is a thermal paste that’s used to try to dissipate the heat generated by the components. 

It’s not really going to work because it’s sealed in a plastic box with no effective heatsink. It’s a token gesture at best. At worst, it creates a mass that’ll slowly heat up and hold temperature because it’s got no way to get rid of it.

Behold the grey goo!

Adrian Kingsley-Hughes/ZDNET

Next to this goo was a bank of capacitors — the black cylinders in the photo — which were the cause of the failure. They’d clearly overheated, with three of them showing signs of bulging.

The problem!

Adrian Kingsley-Hughes/ZDNET

Well there’s the problem!

I also noticed that two of the components — bridge rectifiers that are used to turn AC mains into DC — have been fixed on an angle to make the touch a metal heatsink. It’s not really an effective way to cool down components.

The bottom line

Another “too good to be true” device bites the dust. It’s not the first one I’ve come across, and it won’t be the last.

Moral of the story here is that manufactures are using big number marketing — in this case 1,000W and masses of ports — to scalewash poor quality products. 

This might be a half-decent product if it was built to deliver 100W, but there’s no end of competition at that end of the market. Silkscreen “1,000W” on the outside, sprinkle in a few reviews that feel scripted and fake, and all of a sudden it’s interesting and exciting… right up until it blows up. 

Also: My top 7 laptop-bag essentials now, after decades of remote work

I know of no 1,000W charger. In fact, the 500W Ugreen Nexode is the highest-power charger that I’ve tested that’s legit. And the price is also legit — $250. 

But it’s built to deliver on what it promises and is packed with safety features, including “tip-over protection,” which cuts the output when the unit tips over and prevents it from falling on its side, where it can’t dissipate heat effectively. Now that’s an attention to safety that I like to see in a product that handles that much power. 

But if you want 1,000W of output, you’ll have to buy two and duct tape them together.





Source link