We tested the most popular VPNs in New York, London, and Tokyo – this one is the best for traveling


NordVPN Lab Award with badge

ZDNET

Follow ZDNET: Add us as a preferred source on Google.


Virtual private networks (VPNs) are the kind of tool that you don’t know you need until you need one. Especially when traveling, as so many do during the summer, the best VPNs are crucial for encrypting your traffic, disguising your IP address, and limiting the risk of data exposure and surveillance while you’re using public Wi-Fi.

Also: The best travel VPNs

But the main metric to consider when choosing a VPN is always going to be speed — specifically, download speeds — since that’s what most people do on the web, whether you’re streaming, saving an email attachment, installing new apps, or just about anything else. And when you’re traveling, you want a VPN that won’t slow you down.

We ran the top five VPNs in our lab in Kentucky through rigorous testing to find the fastest VPN for traveling. The one VPN that stood out above the rest for speed was NordVPN, which is why it earns a ZDNET Lab Awards badge. 

How we tested these VPNs

On a Spectrum cable connection, we used different Raspberry Pi configurations with unique VPN services and protocols, running a scheduled test cycle every 16 minutes to avoid network congestion and bottlenecks caused by simultaneous testing. The test cycles were staggered, ensuring that only one Raspberry Pi ran its test at any given time, minimizing cross-device interference and providing a more accurate, stable, and isolated measurement. A single test iteration yielded four metrics: download speed, upload speed, ping/latency, and packet loss.

Each test spanned 24 hours, yielding 90 data points per Raspberry Pi, per metric, per day, totaling approximately 2,160 data points per VPN service over a full six-day test cycle involving six combinations of protocols and server locations. The testing framework included OpenVPN as the baseline for comparison and a VPN-specific preferred protocol, tested against three distance-based server locations: US New York (close), UK London (medium), and Tokyo, Japan (far). 

VPN lab testing

Schylar Breitenstein/ZDNET

To find the fastest VPN, we use the median for download speeds, as it is often more representative than the average and is less affected by temporary spikes, dips, or other outlier events common in internet performance testing. Gianmarco Chumbe, the manager of product testing in the lab, said that, “Generally speaking, higher median download speeds across test conditions indicate stronger throughput performance, though other factors, such as latency, variability, and protocol efficiency, also contribute to overall VPN performance.”

We chose to focus on the preferred protocol method for each VPN test, since it yields the best results for each individual VPN compared to the OpenVPN baseline. In addition, we focused on travel-related aspects of these VPNs, paying closer attention to server speeds in locations outside the US, since travel season is a timely metric for many right now. 

The results

As you can see from our interactive graphics for the preferred protocol London location (Fig. 2) and Tokyo location (Fig. 3), NordVPN had the fastest download speeds compared to the starting speed. For reference, NordVPN was connected to its preferred protocol, NordLynx. 

Read the review: NordVPN

Chumbe said that it was surprising to see how dramatically NordVPN’s performance differed between running on OpenVPN and NordLynx, its proprietary protocol. 

“NordLynx consistently performed among the strongest options, particularly for long-distance server connections, where it achieved some of the highest download speeds observed during testing,” he said. 

Other VPNs that performed well in our preferred protocol testing were Surfshark, which tied with NordVPN for fastest download speed in Fig. 3 and was the fastest in Fig. 1. In addition, IPVanish saw promising speeds across all locations when it ran on the WireGuard protocol. 

(Editor’s note: IPVanish is owned by Ziff Davis, ZDNET’s parent company. For more, see our Editorial Guidelines.)

Notably, ExpressVPN had some of the slowest download speeds on the preferred protocol tests when using its Lightway-UDP protocol. This does not mean that ExpressVPN is a slower VPN, but that other protocols, such as OpenVPN, might work better with it. 

As a tip, almost all of the VPNs we tested offer a free trial — anywhere from 7 to 30 days — or a free money-back guarantee, so you can always sign up for a VPN before your trip and then cancel when you’re home. 

Also: The best free VPNs: Expert tested and reviewed 

Our test results might differ from your experience, depending on the protocol you are using and the type of internet connection you have. However, as a general baseline, our testing provides an expert analysis of how these VPNs perform in different locations and countries, no matter where your travels take you this summer. 

  • Server countries: If you’re going to another country, check that your VPN works there. Most VPNs work in many countries without issue, but some areas — such as China or Russia — may require specific VPNs, which typically cost a lot more. Some VPNs also offer optimized protocols and systems to try to circumvent ISP-level censorship.
  • Security: Consider the VPN provider’s security track record. Preferably, the VPN will be open to external audits, and the company hasn’t suffered any significant recent data breaches. You also want a VPN provider that constantly improves its security posture and shares its updates on this score with the public.
  • Streaming: If you plan to use your VPN to access your streaming service’s home library, verify that it supports your preferred platform. Switching servers often resolves issues abroad, and so if you are blocked, try another server before giving up on the VPN.
  • Legality: Some countries frown upon the use of VPNs, whereas others ban them entirely. If you’re going to a new country known for censorship or online suppression, check the local laws first.
  • Support: As with any subscription software, you may encounter problems with installing apps, using the service, renewing, or canceling. We list VPNs with an available support team.


Show more

No. VPNs can generally protect your data while it’s in motion. If your computer or phone is seized, however, it’s possible law enforcement can access your data, even if it’s encrypted. Some governments might hold your devices without giving you a reason.

Online services you access in another country might also have less protection than those in your host country.


Show more

A VPN might slow your internet speed if the data is encrypted and decrypted before transmission. A good travel VPN should have a minimal impact on your speed, and the added security is worth the slight speed loss.

If you use a public hotspot or hotel connection while you’re away, your speed will likely be slow at the source and not as fast as you are used to at home.


Show more





Source link

Leave a Reply

Subscribe to Our Newsletter

Get our latest articles delivered straight to your inbox. No spam, we promise.

Recent Reviews


The first computer my family owned was an 80286 IBM clone, and it had lots of ports, none of which looked the same. There was a big 5-pin DIN for the keyboard, a serial port, a parallel port, a game port for our joystick, and of course, the VGA port for the monitor.

In comparison, a modern computer has much less diversity in the port department. Not only are there fewer types of ports, but the total number may be quite low as well. When we move to modern laptops, it can be much more minimalist. Some laptops have just a single port on the entire machine! Is this a bad thing? As with anything, the extremes are rarely ideal, but I’d say overall, this has been a pretty positive development for PCs.

The port explosion era was never sustainable

It was more like a port infection

You see, the reason we had so many ports for so long is that people kept inventing new interfaces to make up for the shortcomings of existing ones. However, instead of the newer, better interfaces making the old ones obsolete, they just became additive as perfectly summarized in this classic XKCD comic.

A comic illustrates how competing standards multiply: first showing 14 competing standards, then people agreeing to create one universal standard, followed by a final panel showing there are now 15 competing standards. Credit: Randall Munroe (CC-BY-NC)

In laptops, the need for so many ports reached ridiculous heights. In this video posted by X user PC Philanthropy, you can see his Sager/Clevo D9T absolutely packed with all the trimmings leading to a rather massive laptop.

It is undeniably a cool machine, but obviously goes against the principle of portable computing. Also, every port you install means power and space that could have been taken up by something else. That’s true for laptops and desktops.



















Quiz
8 Questions · Test Your Knowledge

PC ports and motherboard I/O
Trivia challenge

Think you know your USB from your PCIe? Put your connector knowledge to the test.

PortsStandardsHardwareConnectorsMotherboards

Which USB connector type is fully reversible, meaning it can be plugged in either way?

Correct! USB Type-C features a symmetrical oval design that lets you insert it in either orientation. Introduced in 2014, it has become the dominant connector for modern devices and supports everything from data transfer to video output and fast charging.

Not quite — the answer is USB Type-C. The older USB Type-A connector (the flat rectangular one) famously required you to flip it at least twice before getting it right. USB Type-C’s reversible design was one of its biggest selling points when it launched in 2014.

What does the ‘x16’ in a PCIe x16 slot refer to?

Exactly right! PCIe x16 means the slot has 16 data lanes, allowing significantly more bandwidth than smaller x1 or x4 slots. This is why discrete graphics cards almost always use x16 slots — they need that extra throughput to feed pixel data to your display.

Not quite — the ‘x16’ refers to the number of data lanes. More lanes mean more simultaneous data paths between the CPU and the card. Graphics cards use x16 slots because their massive data demands require all 16 of those lanes working together.

Which port on a motherboard is most commonly used to connect a display directly to the CPU’s integrated graphics?

That’s correct! The HDMI and DisplayPort connectors found on a motherboard’s rear I/O panel are wired directly to the CPU’s integrated graphics unit. If you have a discrete GPU installed, you should use that card’s outputs instead for best performance.

The right answer is the HDMI or DisplayPort connectors on the rear I/O panel. These ports bypass the discrete GPU entirely and tap into the CPU’s built-in graphics. It’s a common troubleshooting trap — plugging a monitor into the motherboard instead of the GPU and wondering why nothing works.

What is the primary function of the 24-pin ATX connector on a motherboard?

Spot on! The 24-pin ATX connector is the main power connector that delivers multiple voltage rails — including 3.3V, 5V, and 12V — from the power supply to the motherboard. Without it seated properly, your PC simply won’t power on at all.

The correct answer is delivering power from the PSU to the motherboard. The 24-pin ATX connector is the big wide plug you’ll find on every modern motherboard. It supplies several different voltage levels that the board distributes to components. PCIe cards get their supplemental power from separate 6- or 8-pin connectors directly from the PSU.

Which of the following rear I/O ports transmits both audio and video in a single cable and is most commonly found on modern motherboards?

Correct! HDMI carries both high-definition audio and video over a single cable, making it one of the most convenient display connectors available. It became standard on motherboards as integrated graphics improved, and modern versions support 4K and even 8K resolutions.

The answer is HDMI. VGA is analog-only and carries no audio, DVI-D is digital video only without audio, and S-Video is an older analog format. HDMI bundles both audio and video digitally, which is why it became the go-to connector for TVs, monitors, and motherboard rear panels alike.

What maximum theoretical data transfer speed does USB 3.2 Gen 2×2 support?

Impressive! USB 3.2 Gen 2×2 achieves 20 Gbps by using two 10 Gbps lanes simultaneously — that’s what the ‘2×2’ means. It requires a USB Type-C connector and is most commonly found on high-end motherboards, making it ideal for fast external SSDs.

The correct answer is 20 Gbps. The ‘2×2’ in the name is the key clue — it bonds two 10 Gbps channels together. USB naming got notoriously confusing around this era, with the same physical port potentially supporting very different speeds depending on the generation label printed in the spec sheet.

What is the role of the M.2 slot found on most modern motherboards?

Well done! M.2 is a compact form-factor slot that most commonly hosts NVMe SSDs, which connect via PCIe lanes for blazing-fast storage speeds. Some M.2 slots also support SATA-based SSDs and Wi-Fi/Bluetooth combo cards, making the slot surprisingly versatile.

The correct answer is housing compact storage drives or wireless cards. M.2 replaced the older mSATA standard and supports both PCIe NVMe drives and SATA drives depending on the slot’s keying. NVMe M.2 drives can achieve sequential read speeds many times faster than traditional SATA SSDs.

Which audio connector color on a standard PC rear I/O panel is designated for the main stereo line output to speakers or headphones?

That’s right! The green 3.5mm jack is the standard line-out port used for speakers and headphones in the PC audio color-coding scheme. Blue is line-in for recording, and pink is the microphone input — a color system that’s been consistent across PC motherboards for decades.

The correct answer is green. PC audio jacks follow a long-standing color convention: green for headphones and speakers, blue for line-in (recording from external sources), and pink for the microphone. It’s one of those legacy standards that has quietly persisted even as USB and digital audio have become more common.

Challenge Complete

Your Score

/ 8

Thanks for playing!

USB-C (almost) solved the problem

So close, but not quite there yet

Released to the public in the mid ’90s, USB came to the rescue. The “U” is for “Universal” and for the most part USB has lived up to that promise. Now there was one port that handled data and power. More importantly, USB is fully backwards compatible. So if you plug a USB 1.1 device into a modern USB port, it should work. Whether you can get software drivers for it is another story, but it will talk to the host device.

USB-C has proven to be less universal than I’d like, and the situation is still far better than it used to be. A single USB-C port on one of my laptops can act as a video output for just about anything, even an old VGA monitor.

A Macbook, CRT monitor, and iPad connected together. Credit: Sydney Louw Butler/How-To Geek

My smaller laptops don’t need special chargers anymore, and the latest laptops can pull 240W over USB-C, which is enough for all but the beefiest desktop replacement machines. There is no type of peripheral I can think of that doesn’t give you the option to use it over USB.

But the complaints aren’t so much that we only get USB these days, it’s more that we get so little of it.

Minimal I/O enables better hardware design

Harder, better, faster, stronger

When you only put a handful of USB-C ports on a mobile computer, you reap numerous benefits. The low profile of USB-C means the laptop can be thinner, and the frame can be a stronger and more rigid unibody design. Internally, you have room for more battery, larger performance components, or better cooling.

A green Apple MacBook Neo on display on a wooden table with a product sign behind it. Credit: Patrick Campanale / How-To Geek

It also means the internals can be simpler, and cheaper to design and fabricate, though whether those savings are passed on to customers is another story altogether.

Wireless and cloud-first workflows reduce physical dependency

I guess they are “air” ports

Perhaps the first sign of major change was when smartphones dropped headphone jacks, but the fact is that wireless technologies are now good enough for most peripheral and data connections. So, there’s no need to connect them directly to a port on a computer. Which, in turn, means that there’s no reason to have as many ports on the computer in the first place.

I can’t remember the last time I used a wired mouse or keyboard, and I only use Ethernet for devices that need extremely high speeds, low latency, or improved reliability. For normal day-to-day use, modern Wi-Fi is just fine. So while your laptop might not have as many wired ports on the outside, those wireless chips on the inside still give it numerous connectivity options for audio, input, and data transfer.

You could even make the same argument about storage to some extent, with many thin and light systems leaning on cloud storage to make up for a lack of ports to connect external storage.

MacBook Neo colors on a white background.

Operating System

macOS

CPU

A18 Pro

The MacBook Neo with the A18 Pro chip is Apple’s most affordable laptop yet, with all-day battery life and buttery-smooth performance in a thin and light profile.



The dongle backlash misses the bigger picture

The last bit of the port protest centers around dongles, but I never understood the complaints. Having one port that can be broken out into whatever ports you need using a little box is amazing. It makes ports optional and gives you the choice. If you never plug your laptop into anything, why deal with all the ports you’ll never use?

Likewise, if you only ever use ports with your laptop when you dock it at a desk, then you can just leave your dongle ready to go on your desk, but throwing a small dongle in your laptop sleeve or bag in case you might need it is a small price to pay for all the benefits of minimal IO.



Source link