The AI memory crisis just hit DDR2, a standard from 2003, with 60% price hikes



TL;DR

DDR2 prices jumped 55-60% in Q2 2026 as the AI-driven DRAM shortage forces hardware makers to downgrade to older memory generations.

The AI-driven memory shortage has now reached the oldest DRAM standard still in production. DDR2 contract prices rose 55 to 60 percent in the second quarter of 2026, according to Taiwanese market intelligence firm TrendForce, with a further 35 to 40 percent increase forecast for the third quarter.

The price surge is being driven by hardware makers downgrading their memory specifications to secure supply. TrendForce says some manufacturers are replacing DDR4 designs with DDR3, while others are swapping DDR3 components for DDR2, a standard that first shipped in 2003. The downgrades are a response to continued shortages in mainstream DRAM and rapidly rising contract prices across every memory generation.

The Register, which first reported TrendForce’s findings, noted that it is difficult to imagine modern PC processors supporting memory types this old. The downgrades are more likely affecting embedded systems, industrial equipment, networking hardware, and other devices where older memory standards remain in use.

The root cause is the same one that has been reshaping the entire memory market since late 2025. Samsung, SK Hynix, and Micron have redirected wafer capacity from consumer and commodity DRAM to high-bandwidth memory for AI data centres, where margins run at 70 percent or higher. Every wafer allocated to an HBM stack for an Nvidia GPU is a wafer denied to a consumer laptop, a smartphone, or an industrial controller.

The shortage cascaded downward through memory generations. DDR5 and DDR4 prices rose first, and as those components became scarce, buyers turned to DDR3. Now that DDR3 supply is tightening, the pressure has reached DDR2, a product so old that most of the industry had written it off as a low-margin afterthought.

The supply picture for DDR2 is especially fragile because only a handful of companies still make it. Taiwan’s Winbond and ESMT are the key suppliers. Winbond is gradually winding down DDR2 production and reallocating its capacity toward higher-margin products including DDR3, DDR4, and LPDDR4, according to TrendForce.

ESMT is moving in the opposite direction. The company plans to maximise DDR2 production within its existing wafer allocation at foundry partner Powerchip Semiconductor Manufacturing Corporation, concentrating resources on the segment to capture the demand that Winbond is leaving behind. The divergence means Winbond is removing DDR2 supply faster than ESMT can replace it.

The consequences of the broader memory crisis are already visible across consumer electronics. GoPro issued a going-concern warning after memory prices rose 80 to 115 percent, and PC prices have climbed by double-digit percentages. IDC projects that smartphones, PCs, and tablets could see price increases of 10 to 20 percent by the end of 2026.

Some relief is being planned, but it will arrive slowly. SK Hynix aims to double its silicon wafer output capacity over the next five years, a timeline its chairman announced at Computex in June, while Micron expects what it calls meaningful new capacity at its Virginia fabrication plant in 2027 and 2028. Neither commitment addresses the immediate shortage.

Chinese manufacturer CXMT has begun supplying DDR5 to Western brands including Corsair, offering a potential alternative source for mainstream memory. But CXMT is also converting roughly 20 percent of its own capacity to HBM because the margins are too attractive to resist, limiting how much consumer relief it can provide.

The fact that 2003-era memory components are now experiencing 60 percent quarterly price jumps illustrates how deeply the AI reallocation has distorted the semiconductor supply chain. The shortage is not confined to cutting-edge products. It has reached the bottom of the technology stack, affecting components that most of the industry assumed would remain cheap and abundant indefinitely.



Source link

Leave a Reply

Subscribe to Our Newsletter

Get our latest articles delivered straight to your inbox. No spam, we promise.

Recent Reviews


Most Mac users see Apple Preview as only an app to view images, PDFs, and other documents. That’s it. If that sounds like you, you are leaving a lot on the table, because Preview has quietly grown into one of the most capable apps on macOS, and it’s available for free.

I use the app daily to edit images, markup and sign PDFs, redact information, and so much more. So let me walk you through seven things you probably didn’t know Apple Preview could handle.

You can rearrange, combine, and pull out PDF pages

If you regularly work with PDFs, this one will save you a ton of time. Preview lets you easily rearrange pages in PDFs, combine multiple PDFs into one, and even extract specific pages from a PDF. 

To perform any of these actions, first you have to enable the thumbnail view. To do this, open a PDF file in Preview and go to View → Thumbnails or hit the keyboard shortcut ⌥⌘2 to reveal the sidebar. From here, you can click and drag pages to rearrange them in any order you like.

You can also drag a selected page out of the sidebar directly onto your desktop, and it will save those pages as a new PDF. No need for any extra software. 

You can also drag a PDF document or pages from other PDFs inside another PDF to merge them

Stop people from snooping on your PDFs

If you are sharing a sensitive PDF with someone and you don’t want anyone else to read it, you can lock it using Preview so only people with the correct password can open it. 

To do this, open your PDF, click the info button in the toolbar, find the security lock icon under Permissions, and click the Edit button. 

Now, check the box to require a password to open the document, set your password, and save the changes. You can even control what others can do without the password, like allowing them to print the file, but nothing else.

Another way to hide information is by redacting it. It permanently obscures the information so no one can read it. Note that once you save a redacted document, even you won’t be able to get the information back so ensure to create a copy of the original document before redacting it. 

To redact a document, open the Markup toolbar and click on the Redact tool. Now, you can highlight any text or just select an area to redact it. 

Read PDFs at night without burning your eyes

This one is a recent addition and an incredibly useful one. If you use your Mac in dark mode, Preview now has an option to match that for your PDFs. Go to View → Use Dark Appearance for PDF, and the blinding white background flips to a dark background that’s much easier on the eyes. Just keep in mind that this option only shows up when your Mac is already set to dark mode.

Remove image backgrounds without a third-party app

Preview also offers several image editing tools. Out of all the editing tools, my favorite is the one that lets me remove an image’s background. Yes, you don’t need Affinity or Photoshop to remove a background from an image

Preview can do it. Open an image, go to Tools → Remove Background, or hit the keyboard shortcut ⌘⇧K. As you can see in the image below, Preview has done a great job of removing the background and cutting out the subject. 

Open any image you just copied

Here is a little trick I use all the time. If you copy an image to your clipboard, you don’t need to paste it into a photo editing app to save it. Just open Preview and go to File → New from Clipboard or hit the keyboard shortcut ⌘N. Your copied image opens instantly, ready for you to edit, resize, or export.

Mark up screenshots and PDFs like a pro

The markup toolbar in Preview is genuinely great for quick edits. You can draw circles or rectangles to highlight something, add text, draw arrows, and even drop in your signature. 

While CleanShot X handles all my screenshot annotation needs, Preview is the app I use to markup my PDFs. And if you don’t deal with dozens of screenshots every day, Preview’s built-in functionality will be more than enough for you. 

Bonus tip: extract high-quality app icons

I don’t know who will need this feature, but I use it regularly, so I am sharing this as a bonus. Sometimes I need to use app icons to create images (like the one you see at the top of this article). 

If you have the app already installed on your Mac, you don’t need to hunt for the icon image on the web. Just go to the Application folder in Finder, select the app, and copy it. 

Now, launch Preview and use the “New from Clipboard” option, or use the ⌘N keyboard shortcut to open the app icon as an image in Preview. Now, use the ⌘S shortcut to save it to your desktop. 

Apple Preview is more than just a viewer

The point is that Apple Preview is genuinely powerful, and it’s sitting right there on your Mac, completely free. Whether you are managing PDFs, editing images, or trying to keep a late-night reading session from blinding you, Preview has you covered. Give it a proper chance, and I think it will earn a permanent spot in your workflow.



Source link