Sony and Honda cancel the electric vehicle AFEELA dream



Sony Honda Mobility has discontinued both its AFEELA 1 sedan and an unnamed follow-up SUV, less than a year after opening a dedicated showroom in California. Honda’s sweeping EV retreat left the joint venture without the technical foundations it needed to build either car.


Nine days after Sony Honda Mobility opened its AFEELA Studio and Delivery Hub in Torrance, California, the joint venture announced it was cancelling both cars the showroom was built to sell.

The AFEELA 1 sedan, which had reached the pre-production stage at Honda’s East Liberty Auto Plant in Ohio and was weeks from its first California deliveries, will not reach customers. Neither will the unnamed electric SUV that had been shown as a prototype at CES 2026 and was targeted for a 2028 launch. Reservation holders will receive full refunds of their $200 deposits.

The announcement follows Honda’s much larger strategic reversal, disclosed on 12 March, in which Japan’s second-largest automaker cancelled three US-market electric vehicles, the Honda 0 Saloon, the Honda 0 SUV, and the Acura RSX, and flagged a restructuring charge of up to 2.5 trillion yen, equivalent to approximately $15.7 billion, to be spread across the current and next fiscal year.

That decision will push Honda to its first annual loss since it listed on the Tokyo Stock Exchange in 1957. AFEELA was the direct casualty: the joint venture’s vehicles were designed around Honda’s proprietary EV platforms and technology, and when Honda withdrew those assets, SHM determined it “does not have a viable path forward to bring the models to market as originally planned.”

Sony Honda Mobility was established in September 2022, a joint venture combining Honda’s engineering and manufacturing with Sony’s software and entertainment ecosystem.

The premise was that the next frontier in EVs was the in-car experience, not just the drivetrain, and that Sony’s decades of consumer electronics expertise, its PlayStation platform, and its entertainment content library could differentiate a vehicle in ways that pure automotive manufacturers could not.

The AFEELA 1 was priced from $89,900 for the base Origin trim, with the Signature trim at $102,900, and came equipped with a 40-sensor suite including cameras, lidar, and radar, aiming toward hands-off autonomous driving capability. It had a 300-mile EPA-estimated range and a 150-kilowatt charge rate.

The economics were always difficult. At $89,900, the AFEELA 1 was competing not only against Tesla but against an EV market that has been moving downmarket, not up. Chinese manufacturers have been pushing aggressively into the premium segment globally, while US EV tax credits have been eliminated under the Trump administration and demand in Europe has underperformed.

Honda cited “recent changes in the business environment”, including tariffs and competitive pressure from Chinese manufacturers, as factors behind its broader EV retreat. The industry’s collective writedown on EV ambitions now stands at approximately $67 billion: General Motors has warned of a $7.6 billion hit, Stellantis has flagged $25 billion, and Ford $19 billion, alongside Honda’s $15.7 billion.

Sony and Honda stated that the AFEELA cancellation will not affect their updated full-year consolidated financial forecasts for the fiscal year ending this month. Both companies say they will continue to evaluate the future of the SHM joint venture, with a new mid- to long-term direction to be announced “at the earliest possible opportunity.” 



Source link

Leave a Reply

Subscribe to Our Newsletter

Get our latest articles delivered straight to your inbox. No spam, we promise.

Recent Reviews


Google Maps has a long list of hidden (and sometimes, just underrated) features that help you navigate seamlessly. But I was not a big fan of using Google Maps for walking: that is, until I started using the right set of features that helped me navigate better.

Add layers to your map

See more information on the screen

Layers are an incredibly useful yet underrated feature that can be utilized for all modes of transport. These help add more details to your map beyond the default view, so you can plan your journey better.

To use layers, open your Google Maps app (Android, iPhone). Tap the layer icon on the upper right side (under your profile picture and nearby attractions options). You can switch your map type from default to satellite or terrain, and overlay your map with details, such as traffic, transit, biking, street view (perfect for walking), and 3D (Android)/raised buildings (iPhone) (for buildings). To turn off map details, go back to Layers and tap again on the details you want to disable.

In particular, adding a street view and 3D/raised buildings layer can help you gauge the terrain and get more information about the landscape, so you can avoid tricky paths and discover shortcuts.

Set up Live View

Just hold up your phone

A feature that can help you set out on walks with good navigation is Google Maps’ Live View. This lets you use augmented reality (AR) technology to see real-time navigation: beyond the directions you see on your map, you are able to see directions in your live view through your camera, overlaying instructions with your real view. This feature is very useful for travel and new areas, since it gives you navigational insights for walking that go beyond a 2D map.

To use Live View, search for a location on Google Maps, then tap “Directions.” Once the route appears, tap “Walk,” then tap “Live View” in the navigation options. You will be prompted to point your camera at things like buildings, stores, and signs around you, so Google Maps can analyze your surroundings and give you accurate directions.

Download maps offline

Google Maps without an internet connection

Whether you’re on a hiking trip in a low-connectivity area or want offline maps for your favorite walking destinations, having specific map routes downloaded can be a great help. Google Maps lets you download maps to your device while you’re connected to Wi-Fi or mobile data, and use them when your device is offline.

For Android, open Google Maps and search for a specific place or location. In the placesheet, swipe right, then tap More > Download offline map > Download. For iPhone, search for a location on Google Maps, then, at the bottom of your screen, tap the name or address of the place. Tap More > Download offline map > Download.

After you download an area, use Google Maps as you normally would. If you go offline, your offline maps will guide you to your destination as long as the entire route is within the offline map.

Enable Detailed Voice Guidance

Get better instructions

Voice guidance is a basic yet powerful navigation tool that can come in handy during walks in unfamiliar locations and can be used to ensure your journey is on the right path. To ensure guidance audio is enabled, go to your Google Maps profile (upper right corner), then tap Settings > Navigation > Sound and Voice. Here, tap “Unmute” on “Guidance Audio.”

Apart from this, you can also use Google Assistant to help you along your journey, asking questions about your destination, nearby sights, detours, additional stops, etc. To use this feature on iPhone, map a walking route to a destination, then tap the mic icon in the upper-right corner. For Android, you can also say “Hey Google” after mapping your destination to activate the assistant.

Voice guidance is handy for both new and old places, like when you’re running errands and need to navigate hands-free.

Add multiple stops

Keep your trip going

If you walk regularly to run errands, Google Maps has a simple yet effective feature that can help you plan your route in a better way. With Maps’ multiple stop feature, you can add several stops between your current and final destination to minimize any wasted time and unnecessary detours.

To add multiple stops on Google Maps, search for a destination, then tap “Directions.” Select the walking option, then click the three dots on top (next to “Your Location”), and tap “Edit Stops.” You can now add a stop by searching for it and tapping “Add Stop,” and swap the stops at your convenience. Repeat this process by tapping “Add Stops” until your route is complete, then tap “Start” to begin your journey.

You can add up to ten stops in a single route on both mobile and desktop, and use the journey for multiple modes (walking, driving, and cycling) except public transport and flights. I find this Google Maps feature to be an essential tool for travel to walkable cities, especially when I’m planning a route I am unfamiliar with.


More to discover

A new feature to keep an eye out for, especially if you use Google Maps for walking and cycling, is Google’s Gemini boost, which will allow you to navigate hands-free and get real-time information about your journey. This feature has been rolling out for both Android and iOS users.



Source link