A YouTube channel ran a battery test on two versions of the Galaxy S26. Same phone, same tasks, same conditions, but the only difference was the chip inside. The difference? It turned out to be worth nearly three hours of screen time.
Android Addicts conducted a battery test on two Galaxy S26 units side by side: one powered by the Exynos 2600 (available in some Asian markets) and the other by the Snapdragon 8 Elite Gen 5 (available in the United States).
How bad is it?
The channel performed identical tasks on the phones, including calls, 4K video recording, navigation, streaming, gaming benchmarks, and social media use. While it’s not necessary to do all these tasks on a smartphone daily, tests like these usually put a heavy load on the device, draining the battery.
To get the best-possible results, both phones had Wi-Fi off and 5G active throughout. The result? The Snapdragon-equipped S26 lasted 9 hours and 26 minutes, while the Exynos variant lasted 6 hours and 48 minutes — a difference of nearly 28% or two-and-a-half hours of real-world usage.
The Exynos-powered Galaxy S26 didn’t even make it to the Instagram and Amazon Prime Video segment of the battery test, leaving the Snapdragon unit to soldier on.
Nadeem Sarwar / Digital Trends
Why is Samsung’s own chip losing to Qualcomm’s?
The short answer: heat and hunger. The Exynos 2600 chip draws around 30W under peak load, which is roughly 40% higher than the Snapdragon 8 Elite Gen 5’s 21W ceiling, for nearly the same multi-core output.
Those power spikes generate heat, which is the enemy of the chipset’s efficiency, and the resulting drop in efficiency increases battery consumption. During video encoding, particularly on the Exynos-powered Galaxy S26, it began overheating, further reducing its runtime.
Now, to be fair, the Exynos 2600 still carries the bragging rights as the world’s first 2nm GAA chip. However, right now, it looks like the badge is doing better for marketing than actual, real-world performance.
Tom Bedford / Digital Trends
The difference doesn’t affect Galaxy S26 buyers in the United States. However, for people in other markets (like me), the battery-drain test stings, highlighting the gap that still exists between Samsung and Qualcomm’s latest smartphone processors.
Google Maps has a long list of hidden (and sometimes, just underrated) features that help you navigate seamlessly. But I was not a big fan of using Google Maps for walking: that is, until I started using the right set of features that helped me navigate better.
Add layers to your map
See more information on the screen
Layers are an incredibly useful yet underrated feature that can be utilized for all modes of transport. These help add more details to your map beyond the default view, so you can plan your journey better.
To use layers, open your Google Maps app (Android, iPhone). Tap the layer icon on the upper right side (under your profile picture and nearby attractions options). You can switch your map type from default to satellite or terrain, and overlay your map with details, such as traffic, transit, biking, street view (perfect for walking), and 3D (Android)/raised buildings (iPhone) (for buildings). To turn off map details, go back to Layers and tap again on the details you want to disable.
In particular, adding a street view and 3D/raised buildings layer can help you gauge the terrain and get more information about the landscape, so you can avoid tricky paths and discover shortcuts.
Set up Live View
Just hold up your phone
A feature that can help you set out on walks with good navigation is Google Maps’ Live View. This lets you use augmented reality (AR) technology to see real-time navigation: beyond the directions you see on your map, you are able to see directions in your live view through your camera, overlaying instructions with your real view. This feature is very useful for travel and new areas, since it gives you navigational insights for walking that go beyond a 2D map.
To use Live View, search for a location on Google Maps, then tap “Directions.” Once the route appears, tap “Walk,” then tap “Live View” in the navigation options. You will be prompted to point your camera at things like buildings, stores, and signs around you, so Google Maps can analyze your surroundings and give you accurate directions.
Credit: Google
Download maps offline
Google Maps without an internet connection
Whether you’re on a hiking trip in a low-connectivity area or want offline maps for your favorite walking destinations, having specific map routes downloaded can be a great help. Google Maps lets you download maps to your device while you’re connected to Wi-Fi or mobile data, and use them when your device is offline.
For Android, open Google Maps and search for a specific place or location. In the placesheet, swipe right, then tap More > Download offline map > Download. For iPhone, search for a location on Google Maps, then, at the bottom of your screen, tap the name or address of the place. Tap More > Download offline map > Download.
After you download an area, use Google Maps as you normally would. If you go offline, your offline maps will guide you to your destination as long as the entire route is within the offline map.
Enable Detailed Voice Guidance
Get better instructions
Voice guidance is a basic yet powerful navigation tool that can come in handy during walks in unfamiliar locations and can be used to ensure your journey is on the right path. To ensure guidance audio is enabled, go to your Google Maps profile (upper right corner), then tap Settings > Navigation > Sound and Voice. Here, tap “Unmute” on “Guidance Audio.”
Apart from this, you can also use Google Assistant to help you along your journey, asking questions about your destination, nearby sights, detours, additional stops, etc. To use this feature on iPhone, map a walking route to a destination, then tap the mic icon in the upper-right corner. For Android, you can also say “Hey Google” after mapping your destination to activate the assistant.
Voice guidance is handy for both new and old places, like when you’re running errands and need to navigate hands-free.
Add multiple stops
Keep your trip going
If you walk regularly to run errands, Google Maps has a simple yet effective feature that can help you plan your route in a better way. With Maps’ multiple stop feature, you can add several stops between your current and final destination to minimize any wasted time and unnecessary detours.
To add multiple stops on Google Maps, search for a destination, then tap “Directions.” Select the walking option, then click the three dots on top (next to “Your Location”), and tap “Edit Stops.” You can now add a stop by searching for it and tapping “Add Stop,” and swap the stops at your convenience. Repeat this process by tapping “Add Stops” until your route is complete, then tap “Start” to begin your journey.
You can add up to ten stops in a single route on both mobile and desktop, and use the journey for multiple modes (walking, driving, and cycling) except public transport and flights. I find this Google Maps feature to be an essential tool for travel to walkable cities, especially when I’m planning a route I am unfamiliar with.
More to discover
A new feature to keep an eye out for, especially if you use Google Maps for walking and cycling, is Google’s Gemini boost, which will allow you to navigate hands-free and get real-time information about your journey. This feature has been rolling out for both Android and iOS users.
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
