TCL vs. Hisense: I’ve tested both TV brands for nearly a decade, and here’s my pick


TCL vs Hisense

Kerry Wan/ZDNET

Follow ZDNET: Add us as a preferred source on Google.


Hisense and TCL may have started out as budget-conscious alternatives to Samsung, LG, and Sony, but today, both brands offer top-notch TVs. Both have released Mini-LED models that offer higher refresh rates and brighter screens than OLED options, and in some cases Mini-LEDs even surpass OLEDs in color accuracy and contrast. 

Also: 60Hz vs 120 Hz vs 165Hz: The best refresh rate for your home

Over the past year, I’ve gotten the opportunity to go hands-on with the TCL X11L and Hisense U8QG, putting them through a battery of tests, including Calman calibration and head-to-head comparisons to competitors. 

And as much as I love a good OLED for streaming movies and console gaming, these Mini LED options have been impressive enough to make me reconsider what I think is the best TV tech.

Specifications

TCL X11L

HIsense U8QG

Display type

SQD-Mini LED

Mini LED

Display size

75 – 98 inches

55 – 100 inches

HDR

Dolby Vision

Dolby Vision IQ

Audio Dolby Atmos Dolby Atmos
Refresh rate 144Hz 165Hz
VRR support AMD FreeSync Premium Pro AMD FreeSync Premium Pro
Voice controls Alexa, Google Assistant Alexa, Google Assistant
Price Starting at $3,500 Starting at $800

You should buy the TCL X11L if…

TCL TV

Samantha De Leon/ZDNET

1.You want cutting-edge TV tech

The new SDQ-Mini LED panel from TCL is one of the latest breakthroughs in TV tech, delivering incredible picture quality, contrast, and color accuracy that rival those of the most premium OLED models. 

With up to 20,000 dimming zones and a peak brightness of 10,000 nits, you’ll get a bright, visible image in just about any environment, along with sharp contrast that makes colors pop. You’ll also get Bang & Olufsen-designed speakers for top-notch audio to match the picture. 

Also: TCL X11L review

The images don’t do the TCL X11L justice. In person, the level of color accuracy and detailing is even more impressive. The Halo Control System featured on the panel uses double-layer arch lenses specifically designed to better focus the LED backlighting, reducing bloom and color bleed. 

I’ve been testing TVs for almost a decade, including the high-end OLED options from Sony, LG, and Samsung. And the TCL X11L blows them out of the water in terms of color and brightness, which is perfect if you’re like me and sick to death of not being able to see what’s going on in dark scenes of TV shows and movies.

2. You want in-body audio quality to match

Bang & Olufsen and TCL haven’t just teamed up to work on the X11L. They’ve also collaborated to create a series of home audio equipment with studio-inspired designs and signature B&O sound quality. 

And since TCL worked directly with Bang & Olufsen, you’re guaranteed compatibility with your new TV. So you can spend more time enjoying your new setup and less time troubleshooting. 

But if the price is a bit too steep for your budget, the TCL X11L is also compatible with the TCL Z100 wireless speakers and Z100-SW wireless subwoofer. Each retails for well under $500, so you can pick up a trio for much less than the Bang & Olufsen set will. The Z100 line also features geometric designs that will complement modern decor almost perfectly.

3. You’re looking for a larger screen

The only real drawback to the X11L is that it’s only available in screen sizes from 75 to 98 inches. So if you’re in an apartment or have smaller rooms in your house, you’ll have to check TCL’s other models for a wider range of sizes. 

However, the 75-inch option is more than enough for most living rooms and home theaters, giving you a good balance between size and price. And if you’re looking to set up a truly cinematic home theater, the 98-inch model is almost perfect. 

The extra screen real estate, especially when wall-mounted, will give you almost the same feeling as going to an actual theater (the expensive concessions and sticky floors are up to you).

You should buy the Hisense U8QG if…

Describe what's shown in the image.

Adam Breeden/ZDNET

1. You want more screen size options

The Hisense U8QG is available in sizes from 55 to 100 inches, giving you many more options to fit your space if you have an apartment or a smaller house. 

Each screen size offers consistent picture quality, with a peak brightness of 5,000 nits, Dolby Vision IQ HDR processing, and an IMAX Enhanced picture mode for streaming movies and shows. It also supports AMD FreeSync Premium Pro VRR for smooth motion while console or PC gaming.

Also: Hisense U8QG review

2. You want a higher refresh rate

While the TCL X11L gives you a smooth picture at 144Hz, the Hisense U8QG has a base refresh rate of 165Hz. And the VRR support isn’t just for gaming: you can toggle support on for specific picture modes to take advantage of the 48-165Hz range for everything from live sports and movies to screen sharing and streaming. Coupled with Dolby Atmos IQ and adaptive HDR10+ support, you’ll get sharper images with clean details.

3. You want a Pantone-validated TV

For all its beauty, the Hisense U8QG has something the TCL X11L doesn’t: a Pantone Validated panel. Hisense has partnered with Pantone to test select TV models through rigorous testing and benchmarking to ensure each panel reproduces over 2,000 Pantone Matching System colors as accurately as possible. The U8QG also features a matte display that helps reduce reflections and glare, letting colors and details shine through.

Writer’s choice

As much as I love last year’s Hisense U8QG, the TCL X11L takes the cake for me with its stunningly gorgeous picture quality, exceptionally high brightness, and Bang & Olufsen-designed speakers. You can also pair the X11L with the TCL Z100 line of wireless speakers and subwoofers for a more affordable home audio option. 

And with screen sizes up to 98 inches, you can set up a true cinema in your home to enjoy your favorite movies, shows, and games as they were meant to be seen. 





Source link

Leave a Reply

Subscribe to Our Newsletter

Get our latest articles delivered straight to your inbox. No spam, we promise.

Recent Reviews


The first computer my family owned was an 80286 IBM clone, and it had lots of ports, none of which looked the same. There was a big 5-pin DIN for the keyboard, a serial port, a parallel port, a game port for our joystick, and of course, the VGA port for the monitor.

In comparison, a modern computer has much less diversity in the port department. Not only are there fewer types of ports, but the total number may be quite low as well. When we move to modern laptops, it can be much more minimalist. Some laptops have just a single port on the entire machine! Is this a bad thing? As with anything, the extremes are rarely ideal, but I’d say overall, this has been a pretty positive development for PCs.

The port explosion era was never sustainable

It was more like a port infection

You see, the reason we had so many ports for so long is that people kept inventing new interfaces to make up for the shortcomings of existing ones. However, instead of the newer, better interfaces making the old ones obsolete, they just became additive as perfectly summarized in this classic XKCD comic.

A comic illustrates how competing standards multiply: first showing 14 competing standards, then people agreeing to create one universal standard, followed by a final panel showing there are now 15 competing standards. Credit: Randall Munroe (CC-BY-NC)

In laptops, the need for so many ports reached ridiculous heights. In this video posted by X user PC Philanthropy, you can see his Sager/Clevo D9T absolutely packed with all the trimmings leading to a rather massive laptop.

It is undeniably a cool machine, but obviously goes against the principle of portable computing. Also, every port you install means power and space that could have been taken up by something else. That’s true for laptops and desktops.



















Quiz
8 Questions · Test Your Knowledge

PC ports and motherboard I/O
Trivia challenge

Think you know your USB from your PCIe? Put your connector knowledge to the test.

PortsStandardsHardwareConnectorsMotherboards

Which USB connector type is fully reversible, meaning it can be plugged in either way?

Correct! USB Type-C features a symmetrical oval design that lets you insert it in either orientation. Introduced in 2014, it has become the dominant connector for modern devices and supports everything from data transfer to video output and fast charging.

Not quite — the answer is USB Type-C. The older USB Type-A connector (the flat rectangular one) famously required you to flip it at least twice before getting it right. USB Type-C’s reversible design was one of its biggest selling points when it launched in 2014.

What does the ‘x16’ in a PCIe x16 slot refer to?

Exactly right! PCIe x16 means the slot has 16 data lanes, allowing significantly more bandwidth than smaller x1 or x4 slots. This is why discrete graphics cards almost always use x16 slots — they need that extra throughput to feed pixel data to your display.

Not quite — the ‘x16’ refers to the number of data lanes. More lanes mean more simultaneous data paths between the CPU and the card. Graphics cards use x16 slots because their massive data demands require all 16 of those lanes working together.

Which port on a motherboard is most commonly used to connect a display directly to the CPU’s integrated graphics?

That’s correct! The HDMI and DisplayPort connectors found on a motherboard’s rear I/O panel are wired directly to the CPU’s integrated graphics unit. If you have a discrete GPU installed, you should use that card’s outputs instead for best performance.

The right answer is the HDMI or DisplayPort connectors on the rear I/O panel. These ports bypass the discrete GPU entirely and tap into the CPU’s built-in graphics. It’s a common troubleshooting trap — plugging a monitor into the motherboard instead of the GPU and wondering why nothing works.

What is the primary function of the 24-pin ATX connector on a motherboard?

Spot on! The 24-pin ATX connector is the main power connector that delivers multiple voltage rails — including 3.3V, 5V, and 12V — from the power supply to the motherboard. Without it seated properly, your PC simply won’t power on at all.

The correct answer is delivering power from the PSU to the motherboard. The 24-pin ATX connector is the big wide plug you’ll find on every modern motherboard. It supplies several different voltage levels that the board distributes to components. PCIe cards get their supplemental power from separate 6- or 8-pin connectors directly from the PSU.

Which of the following rear I/O ports transmits both audio and video in a single cable and is most commonly found on modern motherboards?

Correct! HDMI carries both high-definition audio and video over a single cable, making it one of the most convenient display connectors available. It became standard on motherboards as integrated graphics improved, and modern versions support 4K and even 8K resolutions.

The answer is HDMI. VGA is analog-only and carries no audio, DVI-D is digital video only without audio, and S-Video is an older analog format. HDMI bundles both audio and video digitally, which is why it became the go-to connector for TVs, monitors, and motherboard rear panels alike.

What maximum theoretical data transfer speed does USB 3.2 Gen 2×2 support?

Impressive! USB 3.2 Gen 2×2 achieves 20 Gbps by using two 10 Gbps lanes simultaneously — that’s what the ‘2×2’ means. It requires a USB Type-C connector and is most commonly found on high-end motherboards, making it ideal for fast external SSDs.

The correct answer is 20 Gbps. The ‘2×2’ in the name is the key clue — it bonds two 10 Gbps channels together. USB naming got notoriously confusing around this era, with the same physical port potentially supporting very different speeds depending on the generation label printed in the spec sheet.

What is the role of the M.2 slot found on most modern motherboards?

Well done! M.2 is a compact form-factor slot that most commonly hosts NVMe SSDs, which connect via PCIe lanes for blazing-fast storage speeds. Some M.2 slots also support SATA-based SSDs and Wi-Fi/Bluetooth combo cards, making the slot surprisingly versatile.

The correct answer is housing compact storage drives or wireless cards. M.2 replaced the older mSATA standard and supports both PCIe NVMe drives and SATA drives depending on the slot’s keying. NVMe M.2 drives can achieve sequential read speeds many times faster than traditional SATA SSDs.

Which audio connector color on a standard PC rear I/O panel is designated for the main stereo line output to speakers or headphones?

That’s right! The green 3.5mm jack is the standard line-out port used for speakers and headphones in the PC audio color-coding scheme. Blue is line-in for recording, and pink is the microphone input — a color system that’s been consistent across PC motherboards for decades.

The correct answer is green. PC audio jacks follow a long-standing color convention: green for headphones and speakers, blue for line-in (recording from external sources), and pink for the microphone. It’s one of those legacy standards that has quietly persisted even as USB and digital audio have become more common.

Challenge Complete

Your Score

/ 8

Thanks for playing!

USB-C (almost) solved the problem

So close, but not quite there yet

Released to the public in the mid ’90s, USB came to the rescue. The “U” is for “Universal” and for the most part USB has lived up to that promise. Now there was one port that handled data and power. More importantly, USB is fully backwards compatible. So if you plug a USB 1.1 device into a modern USB port, it should work. Whether you can get software drivers for it is another story, but it will talk to the host device.

USB-C has proven to be less universal than I’d like, and the situation is still far better than it used to be. A single USB-C port on one of my laptops can act as a video output for just about anything, even an old VGA monitor.

A Macbook, CRT monitor, and iPad connected together. Credit: Sydney Louw Butler/How-To Geek

My smaller laptops don’t need special chargers anymore, and the latest laptops can pull 240W over USB-C, which is enough for all but the beefiest desktop replacement machines. There is no type of peripheral I can think of that doesn’t give you the option to use it over USB.

But the complaints aren’t so much that we only get USB these days, it’s more that we get so little of it.

Minimal I/O enables better hardware design

Harder, better, faster, stronger

When you only put a handful of USB-C ports on a mobile computer, you reap numerous benefits. The low profile of USB-C means the laptop can be thinner, and the frame can be a stronger and more rigid unibody design. Internally, you have room for more battery, larger performance components, or better cooling.

A green Apple MacBook Neo on display on a wooden table with a product sign behind it. Credit: Patrick Campanale / How-To Geek

It also means the internals can be simpler, and cheaper to design and fabricate, though whether those savings are passed on to customers is another story altogether.

Wireless and cloud-first workflows reduce physical dependency

I guess they are “air” ports

Perhaps the first sign of major change was when smartphones dropped headphone jacks, but the fact is that wireless technologies are now good enough for most peripheral and data connections. So, there’s no need to connect them directly to a port on a computer. Which, in turn, means that there’s no reason to have as many ports on the computer in the first place.

I can’t remember the last time I used a wired mouse or keyboard, and I only use Ethernet for devices that need extremely high speeds, low latency, or improved reliability. For normal day-to-day use, modern Wi-Fi is just fine. So while your laptop might not have as many wired ports on the outside, those wireless chips on the inside still give it numerous connectivity options for audio, input, and data transfer.

You could even make the same argument about storage to some extent, with many thin and light systems leaning on cloud storage to make up for a lack of ports to connect external storage.

MacBook Neo colors on a white background.

Operating System

macOS

CPU

A18 Pro

The MacBook Neo with the A18 Pro chip is Apple’s most affordable laptop yet, with all-day battery life and buttery-smooth performance in a thin and light profile.



The dongle backlash misses the bigger picture

The last bit of the port protest centers around dongles, but I never understood the complaints. Having one port that can be broken out into whatever ports you need using a little box is amazing. It makes ports optional and gives you the choice. If you never plug your laptop into anything, why deal with all the ports you’ll never use?

Likewise, if you only ever use ports with your laptop when you dock it at a desk, then you can just leave your dongle ready to go on your desk, but throwing a small dongle in your laptop sleeve or bag in case you might need it is a small price to pay for all the benefits of minimal IO.



Source link