US and European authorities disrupt socksEscort proxy service tied to AVrecon botnet


US and European authorities disrupt socksEscort proxy service tied to AVrecon botnet

Pierluigi Paganini
March 13, 2026

Authorities in the US and Europe disrupted the SocksEscort proxy service, which used the AVrecon botnet and infected about 360,000 devices since 2020.

Law enforcement agencies in the US and Europe have disrupted SocksEscort, a malicious proxy service powered by the AVrecon botnet. Active since 2020, the service hijacked roughly 360,000 devices and allowed cybercriminals to route traffic through compromised systems to support illegal activities.

On March 11, 2026, Europol and partners from the US and several European countries launched Operation Lightning against the SocksEscort. The service had compromised more than 369,000 routers and IoT devices across 163 countries, providing over 35,000 proxies to customers. Authorities seized 34 domains and 23 servers in seven countries and froze $3.5 million in cryptocurrency while disconnecting infected devices from the network.

An investigation led by Europol found a botnet of infected devices, mainly residential routers exploited through vulnerabilities. The network supported cybercrime activities such as ransomware operations, DDoS attacks, and the distribution of child sexual abuse material.

“The compromised devices were infected through a vulnerability in the residential modems of a specific brand. Customers of the criminal service paid for licences to abuse these infected devices, hiding their original IP addresses to engage in various criminal activities.” reads the press release published by Europol. “To protect against such exploits, users, and vendors are advised to update the firmware of their devices regularly.”

The SocksEscort platform sold access to compromised IP addresses from infected routers and modems worldwide, allowing criminals to hide their identity online. Victims were unaware their devices were abused for illicit activity. According to Europol, customers paid anonymously with cryptocurrency, generating over €5 million in revenue.

“Cybercrime thrives on anonymity. Proxy services like ‘SocksEscort’ provide criminals with the digital cover they need to launch attacks, distribute illegal content and evade detection. By dismantling this infrastructure, law enforcement has disrupted a service that enabled cybercrime on a global scale.” said Catherine De Bolle, the Europol Executive Director. “Operations like this show that when investigators connect the dots internationally, the infrastructure behind cybercrime can be exposed and shut down.”

The US DoJ confirmed also wrote that crooks used the SocksEscort network to hide their real IP addresses and locations while carrying out fraud, including bank and cryptocurrency account takeovers and fake unemployment claims in the U.S. Victims lost millions, including $1M from a crypto investor and $700K from a manufacturing firm. Authorities from Austria, France, and the Netherlands helped dismantle the infrastructure.

“According to court documents, SocksEscort infected home and small business internet routers with malware. The malware allowed SocksEscort to direct internet traffic through the infected routers. SocksEscort sold this access to its customers. Since the summer of 2020, SocksEscort has offered to sell access to about 369,000 different IP addresses.” states the DoJ. “As of February 2026, the SocksEscort application listed approximately 8,000 infected routers to which its customers could buy access, of those, 2,500 were in the United States.”

In July 2023, Lumen Black Lotus Labs uncovered a long-running hacking campaign targeting SOHO routers with a strain of malware dubbed AVrecon. The malware was spotted for the first time in May 2021, but has been operating under the radar for more than two years.

“Lumen Black Lotus Labs identified another multi-year campaign involving compromised routers across the globe. This is a complex operation that infects small-office/home-office (SOHO) routers, deploying a Linux-based Remote Access Trojan (RAT) we’ve dubbed “AVrecon.”” reads the analysis published by Lumen.

Threat actors behind the campaign aimed at building a botnet to use for a range of criminal activities, from password spraying to digital advertising fraud.

The AVrecon malware was written in C to ensure portability and designed to target ARM-embedded devices. The experts discovered that the malicious code had been compiled for different architectures.

Black Lotus Labs announced it had partnered with the Department of Justice in taking down the proxy network known.

“This botnet posed a significant threat, as it was marketed exclusively to criminals and composed solely of compromised edge devices. Over the past several years, SocksEscort maintained an average size of approximately 20,000 distinct victims weekly, with communications routed through an average of 15 command-and-control nodes (C2s).” Lumen experts wrote on LinkedIn.

More than half of the victims were located in the United States and the United Kingdom, allowing attackers to conduct highly targeted operations and increasing the risks associated with the SocksEscort proxy network.

Follow me on Twitter: @securityaffairs and Facebook and Mastodon

Pierluigi Paganini

(SecurityAffairs – hacking, AVrecon botnet)







Source link

Leave a Reply

Subscribe to Our Newsletter

Get our latest articles delivered straight to your inbox. No spam, we promise.

Recent Reviews


Spotify aims to provide a consistent listening experience that uses minimal data. As a result, your audio quality might be less than ideal, especially if you’re using a pair of high-fidelity headphones or high-end speakers. Here’s how to fix that.

Switch audio streaming quality to Very High or Lossless

The default audio streaming quality in both the mobile and desktop Spotify apps is set to Automatic, which usually keeps the audio quality at Normal, which is only 96 Kbps. Even though Spotify uses the Ogg Vorbis codec, which is superior to MP3, OGG files exhibit slight (but noticeable) digital noise, poor bass detail, dull treble, and a narrow soundstage at 96 Kbps.

Even worse, Spotify is aggressive about adjusting the automatic bitrate. Even though 4G is more than fast enough to stream high-quality OGG files, even with a weak signal, Spotify may still drop the quality to Low, which has a bitrate of just 24 Kb/s. You will notice such a sharp drop in quality, even on a pair of bottom-of-the-barrel headphones.

To rectify this, open the Spotify app, tap your user image, open “Settings and privacy,” and tap the “Media Quality” menu. Once there, set Wi-Fi streaming quality and cellular streaming quality to “Very high” or “Lossless.”

I recommend setting cellular streaming quality to Very high and reserving Lossless for Wi-Fi, since lossless streaming is very data-intensive. One hour of streaming lossless files can take up to 1GB of data, as well as a good chunk of your phone’s storage, because Spotify caches files you’re frequently streaming. Besides, you’ll struggle to notice the difference unless you’re listening to music on a wired pair of high-end headphones or speakers; wireless connection just doesn’t have the bandwidth needed to convey the full fidelity of Spotify lossless audio.

You might opt for High quality if you have a capped data plan, but I recommend doing so only if you stream hours upon hours’ worth of music every single day over a cellular network. For instance, I burn through about 8 GB of data per month on average while streaming about two hours of very high-quality music over a cellular network each day.

Illustration of a headphone with various music icons around.


How Audio Compression Works and Why It Can Affect Your Music Quality

Feeling the squeeze when listening to your favorite song?

Set audio download quality to Very high or Lossless

If you tend to download songs and albums for offline listening, you should also set the audio download quality to “Very high” or “Lossless.” This setting is located just under the audio streaming quality section.

The audio download quality menu in Spotify's mobile app.

If you’ve got enough free storage on your phone, opt for the latter, but if you’d rather save storage space, set it to Very high. You’ll hardly hear the difference, but lossless files are about five times larger than the 320 Kb/s OGG files Spotify offers at its Very high quality setting, and they can quickly fill up your phone’s storage.

Adjust video streaming quality at your discretion

The last section of the Media quality menu is Video streaming quality. This sets the quality of video podcasts and music videos available for certain songs. Since I care about neither, I set it to “Very high” on Wi-Fi and “Normal” on cellular, but you should tweak the two options at your discretion because songs sound notably better at higher video streaming quality levels.

If you often watch videos over cellular and have unlimited data, feel free to toggle video quality to very high.

Make sure Data Saver mode is disabled

Even if your audio quality is set to Very high or Lossless, Spotify will switch to low-quality streaming if the app’s Data saver mode is enabled. This option is located in the Data saving and offline menu. Open the menu, then set it to “Always off,” or choose “Automatic” to have Spotify’s Data Saver mode kick in alongside your phone’s Data Saver mode.

You can also enable volume normalization and play around with the built-in equalizer

Spotify logo in the center of the screen with an equalizer in front. Credit: Lucas Gouveia / How-To Geek

Last but not least, there are two additional features you can play with to improve your listening experience. The first is volume normalization, which sets the same loudness for every track you’re listening to. This can be handy because different albums are mastered at different loudness levels, with newer music usually being louder.

Since I’m an album-oriented listener, I keep the option disabled. I can just play an album and set the audio volume accordingly, and I don’t really mind louder songs when listening to playlists, artists, or song radios.

But if you can’t stand one song being quiet and the next rattling the windows, visit the Playback menu, enable “Volume normalization,” and set it to “Quiet” or “Normal.” The “Loud” option can digitally compress files, and neither Spotify nor I recommend using it. This also happens with “Quiet” and “Normal,” since both adjust the decibel level of the master recording for each song, but the compression level is much lower and extremely hard to notice.

Before I end this, I should also mention that you can access the equalizer directly from the Spotify app, where you can fine-tune your music listening experience or pick one of the available equalizer presets. If your phone has a built-in equalizer, Spotify will open it; if it doesn’t, you can use Spotify’s. On my phone (a Samsung Galaxy S21 FE), I can only use One UI’s built-in equalizer.

To open the equalizer, open “Playback,” then hit the “Equalizer” button. Now you can equalize your audio to your heart’s content.


Adjusting just a few settings can have a drastic impact on your Spotify listening experience. If you aren’t satisfied with Spotify’s sound quality, make sure to adjust the audio before jumping ship. You should also check the sound quality settings from time to time, as Spotify can reset them during app updates.​​​​​​​

Three phones with a Spotify screen and the logo in the center.


These 8 Spotify Features Are My Favorite Hidden Gems

Look for these now.



Source link