Insta360 Pro Mic review: specs, performance, cost


The smiley face on this microphone is actually an e-ink screen that you can change.

The Insta360 Mic Pro is not the smallest wireless mic you can get, but it might be the best for sound quality and certainly for build quality.

Your first impression of the Insta360 Mic Pro may be wrong. The two microphones in the set I reviewed come with what look like bright yellow labels, one of which is a smiley emoji, and you have to think you’d never wear this on camera.

But while it’s true that microphones should be unobtrusive, this one actually is. That’s because the yellow labels are not labels at all; they are e-ink displays that can be changed to anything.

So you can very easily replace them with, say, a company or show’s logo, and that new image will stay there until you change it again. I’ve just replaced both with a totally blank, black image so that the e-ink display blends in more with the rest of the microphone.

I’m okay to do this, though, because I tend to use a wireless mic on my own. When I next interview someone, it might be more useful to give their mic a different image to distinguish it.

Two round Insta360 remote controls on a white surface, one displaying the Insta360 logo, the other showing a smiling face, both with black bezels and small control icons

They look like irritating stickers, but they’re actually superb color e-ink displays you can change at will.

Not that I’d admit this to anyone but you, but I am a little tempted to go find a photo of a “Star Trek” combadge to put on there.

Insta360 Mic Pro review – what you get

Insta360 Mic Pro is from the makers of Insta360 cameras, and the software reportedly makes it particularly easy to set it up for those. I tested it entirely with an iPhone, however, and actually it’s hard to imagine the setup being any easier.

Except if you do have an Insta360 X5, X4 Air, Insta360 Pro 2, or an Insta GO Ultra, the microphones will connect to them directly. For everything else, such as an iPhone, you need a receiver, which comes in the set.

The set also comes in various versions, depending on the number of microphones and receivers you choose. Insta calls microphones transmitters, and it is possible to buy one on its own, either as a replacement or as an addition.

The Insta360 Mic Pro can pair with up to four receivers, which means you could plug a receiver into four cameras and have them all recording equally good audio. Additionally, each receiver can pair with up to four microphones, allowing it to capture four interviewees on separate audio tracks.

Normally, you would get either a set with a receiver and several microphones. There is a set that has one microphone and one receiver, but I tested the edition with two microphones. In that set you get:

  • 2 x Insta360 Pro microphone transmitters
  • 1 x Insta360 Pro receiver
  • 2 x clips for the microphones
  • 2 x magnetic backplates
  • 1 x charging case
  • 1 x iPhone adapter
  • 1 x dead cat wind shield
  • 1 x carrying pouch
  • 1 x USB-C to USB-C charging cable

It is all exceptionally well made. The charging case is just hard enough to open that you’ll never do it accidentally, for instance, and the receiver has a particularly fine little screen.

As shipped, the microphones come with the shirt or blouse clip attached, and the clips are so well connected that you do fear breaking something when you try to remove them. After you’ve removed it once, though, fitting and removing the clip feels straightforward.

It’s a little hard, however, slipping the microphones back into the case until you adjust the position of the clip. Alternatively, you can leave the clip off, and there is a separate slot for it within the case.

Open hard case holding a compact electronic device with a small screen and circular control knob, resting in a molded interior tray against a plain light background.

The charging case with only the receiver in it. Note the slots for the microphones, clips, and magnetic backplates.

Each of these elements comes individually wrapped in protective material so you can choose whether or not to load up your charging case with them.

That does include the iPhone adapter. This is a very small piece of plastic and metal that has USB-C at one end and a presumably proprietary connector at the other.

This connector slots into the base of the receiver, which initially comes with a blank plate. It all looks delicate, and you wouldn’t want to be constantly removing and perhaps losing the connector.

Except if you are solely or chiefly going to be using the Insta360 Mic Pro with an iPhone, you can fit this connector once and leave it. The receiver’s slot in the charging case has room for it.

Since this iPhone adaptor is USB-C, you can of course connect it to iPads and Macs. However, the shape of the receiver and its size are such that you can’t connect it, for instance, to the front USB-C ports on a Mac Studio without a dock.

Insta360 Mic Pro review – setting up for one and two users

When it is plugged in, the whole receiver stands a little proud of the iPhone. It’s a much thicker receiver than I’ve used before with my previous favorite mic, the tiny Hollyland Lark M2S.

Consequently, I’ve taken to making the receiver the last thing I attach after my iPhone is mounted, and the first thing I remove before I take everything down again.

In use, that receiver juts out from the iPhone enough that its exquisite little screen is clearly visible, showing you audio levels during recording. The first time you use it, you have to pair the microphones to the receiver, and an on-screen QR code prompts you through downloading the Insta360 app.

Smartphone showing custom city wallpapers, including Paris and Tokyo icons, beside a small round gadget displaying a Paris skyline illustration on its circular screen.

You can set a custom image on your microphone’s screen or use one of the very many supplied ones. I’m not judging.

Exactly as I started to write this, that app popped up a notification on my Mac, promoting some summertime offer or other. That’s despite the app being only on my iPhone, not on the Mac.

“Your perks have landed,” it said, and I said something very different in return.

Overall, the app is clean and simple; it was a straightforward process to download it from the App Store and pair each of the two microphones. But you do have to bat away an ad or two on the way.

You may not use the app much at all, though. As well as the essential pairing, there is what I’d call the equally essential option to get rid of the bright yellow smiley faces on the mic.

But otherwise, there are a few settings that you will come back to. Hang on a second while I tell my iPhone not to allow notifications from it.

Insta360 Mic Pro review – sound quality

I’m not an audiophile, and it would be good if there could be a “but” about here in this sentence, yet there isn’t. I do make a lot of video and audio, though, and to my ear, the Insta360 Mic Pro sounds excellent.

Audio editing software window showing two horizontal tracks with blue waveforms, green and yellow track icons on the left, transport controls and timeline across the top on a Mac screen

Top: audio from the new Insta360 Mic Pro. Bottom: the same audio recorded on a Hollyland Lark M2S

This is a screengrab of unedited, unaltered audio waveforms in Logic Pro. The top track is from the Insta360 Mic Pro, and the bottom one is from the Hollyland Lark M2S, which I have been very happy with up to right now.

The two audio tracks were recorded simultaneously, both microphones being worn on the same shirt and approximately equally positioned. Later in the production process, I would typically compress that Hollyland Lark M2S track and never be remotely disappointed with it, but the Insta360 Mic Pro is definitely louder and clearer without any processing.

I would like the microphones to be smaller, and I do miss that from the Hollyland ones, but the sound quality is so much better than what I’ve been using that I’ve switched to the Insta360 Mic Pro. I expect, based on the specifications, that would have made that switch even if I’d been using the same firm’s previous model, the Insta360 Mic Air.

That’s because while the Insta360 Mic Air costs less and is also quite a bit lighter at about 8 grams instead of almost 20 grams, it has a single microphone. The Insta360 Mic Pro has a three-microphone array with more pickup options.

This new model also has greater noise cancellation, and it comes with 32GB of internal storage. So the microphones themselves are backup audio recorders.

Small black Mic Pro wireless microphone displaying language selection screen in English and Chinese, resting on an instruction manual showing Bluetooth connection diagrams and bilingual text

The receiver (pictured atop the provided Quick Start Guide) is larger than some, but capable of handling four audio streams

As it happens, I’ve never used an Insta360 camera. But if they’re as well-built as these microphones, I’m now very tempted.

Insta360 Mic Pro review – should you buy

I’m hardly going to say no, you shouldn’t, not after practically raving about the Insta360 Mic Pro. There is a cost for all of these points, though, and it’s enough that it can’t be a casual purchase.

But while there is the lower-cost Insta360 Mic Air (typically on Amazon for about $55), the new model is significantly better. Plus, you can buy a single microphone and receiver at first, then later add on further mics as you need them.

Insta360 Mic Pro review – Pros

  • Very good audio with a three-mic array
  • On-microphone backup storage
  • Excellent for multi-cam and multi-interview shoots
  • E-ink display on each microphone
  • Extremely good build quality

Insta360 Mic Pro review – Cons

  • Receiver is too large to fit in all Mac USB-C ports
  • Not as small and unobtrusive as some other mics

Insta360 Mic Pro rating – 4.5 out of 5

Insta360 Mic Pro review – where to buy

The Insta360 Mic Pro set as tested here is $330 on Amazon and comes with two microphones and one receiver. A $200 single-microphone and single-receiver version will be available, although it is not on Amazon at the time of writing.

Nor is the option to buy further microphones, but that is rolling out too. A single Insta360 Mic Pro microphone costs $100 on its own.



Source link

Leave a Reply

Subscribe to Our Newsletter

Get our latest articles delivered straight to your inbox. No spam, we promise.

Recent Reviews


The first computer my family owned was an 80286 IBM clone, and it had lots of ports, none of which looked the same. There was a big 5-pin DIN for the keyboard, a serial port, a parallel port, a game port for our joystick, and of course, the VGA port for the monitor.

In comparison, a modern computer has much less diversity in the port department. Not only are there fewer types of ports, but the total number may be quite low as well. When we move to modern laptops, it can be much more minimalist. Some laptops have just a single port on the entire machine! Is this a bad thing? As with anything, the extremes are rarely ideal, but I’d say overall, this has been a pretty positive development for PCs.

The port explosion era was never sustainable

It was more like a port infection

You see, the reason we had so many ports for so long is that people kept inventing new interfaces to make up for the shortcomings of existing ones. However, instead of the newer, better interfaces making the old ones obsolete, they just became additive as perfectly summarized in this classic XKCD comic.

A comic illustrates how competing standards multiply: first showing 14 competing standards, then people agreeing to create one universal standard, followed by a final panel showing there are now 15 competing standards. Credit: Randall Munroe (CC-BY-NC)

In laptops, the need for so many ports reached ridiculous heights. In this video posted by X user PC Philanthropy, you can see his Sager/Clevo D9T absolutely packed with all the trimmings leading to a rather massive laptop.

It is undeniably a cool machine, but obviously goes against the principle of portable computing. Also, every port you install means power and space that could have been taken up by something else. That’s true for laptops and desktops.



















Quiz
8 Questions · Test Your Knowledge

PC ports and motherboard I/O
Trivia challenge

Think you know your USB from your PCIe? Put your connector knowledge to the test.

PortsStandardsHardwareConnectorsMotherboards

Which USB connector type is fully reversible, meaning it can be plugged in either way?

Correct! USB Type-C features a symmetrical oval design that lets you insert it in either orientation. Introduced in 2014, it has become the dominant connector for modern devices and supports everything from data transfer to video output and fast charging.

Not quite — the answer is USB Type-C. The older USB Type-A connector (the flat rectangular one) famously required you to flip it at least twice before getting it right. USB Type-C’s reversible design was one of its biggest selling points when it launched in 2014.

What does the ‘x16’ in a PCIe x16 slot refer to?

Exactly right! PCIe x16 means the slot has 16 data lanes, allowing significantly more bandwidth than smaller x1 or x4 slots. This is why discrete graphics cards almost always use x16 slots — they need that extra throughput to feed pixel data to your display.

Not quite — the ‘x16’ refers to the number of data lanes. More lanes mean more simultaneous data paths between the CPU and the card. Graphics cards use x16 slots because their massive data demands require all 16 of those lanes working together.

Which port on a motherboard is most commonly used to connect a display directly to the CPU’s integrated graphics?

That’s correct! The HDMI and DisplayPort connectors found on a motherboard’s rear I/O panel are wired directly to the CPU’s integrated graphics unit. If you have a discrete GPU installed, you should use that card’s outputs instead for best performance.

The right answer is the HDMI or DisplayPort connectors on the rear I/O panel. These ports bypass the discrete GPU entirely and tap into the CPU’s built-in graphics. It’s a common troubleshooting trap — plugging a monitor into the motherboard instead of the GPU and wondering why nothing works.

What is the primary function of the 24-pin ATX connector on a motherboard?

Spot on! The 24-pin ATX connector is the main power connector that delivers multiple voltage rails — including 3.3V, 5V, and 12V — from the power supply to the motherboard. Without it seated properly, your PC simply won’t power on at all.

The correct answer is delivering power from the PSU to the motherboard. The 24-pin ATX connector is the big wide plug you’ll find on every modern motherboard. It supplies several different voltage levels that the board distributes to components. PCIe cards get their supplemental power from separate 6- or 8-pin connectors directly from the PSU.

Which of the following rear I/O ports transmits both audio and video in a single cable and is most commonly found on modern motherboards?

Correct! HDMI carries both high-definition audio and video over a single cable, making it one of the most convenient display connectors available. It became standard on motherboards as integrated graphics improved, and modern versions support 4K and even 8K resolutions.

The answer is HDMI. VGA is analog-only and carries no audio, DVI-D is digital video only without audio, and S-Video is an older analog format. HDMI bundles both audio and video digitally, which is why it became the go-to connector for TVs, monitors, and motherboard rear panels alike.

What maximum theoretical data transfer speed does USB 3.2 Gen 2×2 support?

Impressive! USB 3.2 Gen 2×2 achieves 20 Gbps by using two 10 Gbps lanes simultaneously — that’s what the ‘2×2’ means. It requires a USB Type-C connector and is most commonly found on high-end motherboards, making it ideal for fast external SSDs.

The correct answer is 20 Gbps. The ‘2×2’ in the name is the key clue — it bonds two 10 Gbps channels together. USB naming got notoriously confusing around this era, with the same physical port potentially supporting very different speeds depending on the generation label printed in the spec sheet.

What is the role of the M.2 slot found on most modern motherboards?

Well done! M.2 is a compact form-factor slot that most commonly hosts NVMe SSDs, which connect via PCIe lanes for blazing-fast storage speeds. Some M.2 slots also support SATA-based SSDs and Wi-Fi/Bluetooth combo cards, making the slot surprisingly versatile.

The correct answer is housing compact storage drives or wireless cards. M.2 replaced the older mSATA standard and supports both PCIe NVMe drives and SATA drives depending on the slot’s keying. NVMe M.2 drives can achieve sequential read speeds many times faster than traditional SATA SSDs.

Which audio connector color on a standard PC rear I/O panel is designated for the main stereo line output to speakers or headphones?

That’s right! The green 3.5mm jack is the standard line-out port used for speakers and headphones in the PC audio color-coding scheme. Blue is line-in for recording, and pink is the microphone input — a color system that’s been consistent across PC motherboards for decades.

The correct answer is green. PC audio jacks follow a long-standing color convention: green for headphones and speakers, blue for line-in (recording from external sources), and pink for the microphone. It’s one of those legacy standards that has quietly persisted even as USB and digital audio have become more common.

Challenge Complete

Your Score

/ 8

Thanks for playing!

USB-C (almost) solved the problem

So close, but not quite there yet

Released to the public in the mid ’90s, USB came to the rescue. The “U” is for “Universal” and for the most part USB has lived up to that promise. Now there was one port that handled data and power. More importantly, USB is fully backwards compatible. So if you plug a USB 1.1 device into a modern USB port, it should work. Whether you can get software drivers for it is another story, but it will talk to the host device.

USB-C has proven to be less universal than I’d like, and the situation is still far better than it used to be. A single USB-C port on one of my laptops can act as a video output for just about anything, even an old VGA monitor.

A Macbook, CRT monitor, and iPad connected together. Credit: Sydney Louw Butler/How-To Geek

My smaller laptops don’t need special chargers anymore, and the latest laptops can pull 240W over USB-C, which is enough for all but the beefiest desktop replacement machines. There is no type of peripheral I can think of that doesn’t give you the option to use it over USB.

But the complaints aren’t so much that we only get USB these days, it’s more that we get so little of it.

Minimal I/O enables better hardware design

Harder, better, faster, stronger

When you only put a handful of USB-C ports on a mobile computer, you reap numerous benefits. The low profile of USB-C means the laptop can be thinner, and the frame can be a stronger and more rigid unibody design. Internally, you have room for more battery, larger performance components, or better cooling.

A green Apple MacBook Neo on display on a wooden table with a product sign behind it. Credit: Patrick Campanale / How-To Geek

It also means the internals can be simpler, and cheaper to design and fabricate, though whether those savings are passed on to customers is another story altogether.

Wireless and cloud-first workflows reduce physical dependency

I guess they are “air” ports

Perhaps the first sign of major change was when smartphones dropped headphone jacks, but the fact is that wireless technologies are now good enough for most peripheral and data connections. So, there’s no need to connect them directly to a port on a computer. Which, in turn, means that there’s no reason to have as many ports on the computer in the first place.

I can’t remember the last time I used a wired mouse or keyboard, and I only use Ethernet for devices that need extremely high speeds, low latency, or improved reliability. For normal day-to-day use, modern Wi-Fi is just fine. So while your laptop might not have as many wired ports on the outside, those wireless chips on the inside still give it numerous connectivity options for audio, input, and data transfer.

You could even make the same argument about storage to some extent, with many thin and light systems leaning on cloud storage to make up for a lack of ports to connect external storage.

MacBook Neo colors on a white background.

Operating System

macOS

CPU

A18 Pro

The MacBook Neo with the A18 Pro chip is Apple’s most affordable laptop yet, with all-day battery life and buttery-smooth performance in a thin and light profile.



The dongle backlash misses the bigger picture

The last bit of the port protest centers around dongles, but I never understood the complaints. Having one port that can be broken out into whatever ports you need using a little box is amazing. It makes ports optional and gives you the choice. If you never plug your laptop into anything, why deal with all the ports you’ll never use?

Likewise, if you only ever use ports with your laptop when you dock it at a desk, then you can just leave your dongle ready to go on your desk, but throwing a small dongle in your laptop sleeve or bag in case you might need it is a small price to pay for all the benefits of minimal IO.



Source link