If you were an early NVMe adopter or just like pulling apart old laptops for parts, you’ve probably got one or two tiny 64GB or 128GB NVMe SSDs lying around. They’re too small to realistically use as primary storage in a modern desktop or laptop, but it’s also hard to justify leaving them unused in a drawer—and they don’t exactly make for good “cold” storage anyway.
As it turns out, there are a surprising number of situations where raw NVMe speed matters far more than capacity. Here are just a few ways you can put that old NVMe drive to work.
Turn it into a high-speed external SSD using an NVMe enclosure
Fast portable storage that beats any regular thumb drive
NVMe SSDs rely on ultra-fast M.2 PCIe slots to deliver maximum performance. Unfortunately, a typical consumer machine has a very limited number of these—most motherboards, laptops, and mini PCs provide just one or two, which are usually easy to fill with higher-capacity drives.
Fortunately, there’s a way around this by using an enclosure, which converts that high-speed M.2 NVMe connection into a USB-C interface that you can plug into almost anything. USB4 enclosures are the fastest, but since you’re likely working with older or lower-capacity NVMe drives, a cheap USB 3.2 Gen 2 enclosure makes a lot of sense. Even at 10Gbps, it’ll technically bottleneck NVMe speeds slightly, but you can still expect pretty fast transfer speeds of up to 1,250MB/s.
- Speed
-
10Gbit
- Connection
-
USB-C
The UGREEN M.2 NVMe SSD Enclosure is perfect for assembling your own USB SSD at home. It offers 10Gbps transfer rates over USB 3.2 Gen 2, and accepts both M and M&B key M.2 PCIe SSDs. With a USB-C interface, it’ll easily hook into your desktop or laptop to provide you with fast portable storage anywhere you go.
Once installed in the enclosure, the NVMe effectively becomes a flash drive on steroids. It’s significantly faster than USB sticks and handles sustained transfers much better than even high-end flash drives. That makes it ideal for moving large files between machines without relying on the internet or a local network.
The enclosure also helps keep the NVMe relatively cool and protects it from minor knocks and drops, turning it into a compact, high-speed grab-and-go drive for projects, media, and general file transfers.
Building your own external SSD? Avoid these 3 costly mistakes
Building your own external SSD is straightforward, but a few common mistakes can ruin the experience.
Run a lightweight homelab or self-hosted services from it
A compact base for a personal server
128GB doesn’t sound like much in the context of a modern Windows machine, but in a headless homelab server, it can be complete overkill. I recently turned an old laptop with a 128GB NVMe SSD into a DIY NAS and self-hosted media machine, and, believe it or not, the drive sits almost empty.
This is because all the NVMe SSD needs to store is a relatively light Linux Ubuntu Server OS and several Docker containers like Jellyfin, Home Assistant, and Immich, as well as any potential cache, while my external HDD is what stores the actual files.
Most self-hosted apps take up less than a gigabyte, so even if you’ve got 50 of them installed alongside your OS, you’re unlikely to run out of storage on a small-capacity NVMe.
If you’ve got a mini PC or laptop lying around and would like to spin up a homelab, a small NVMe SSD is realistically all you’re going to need. And if the machine already has a larger NVMe inside it, you could replace it with a small NVMe and sell or use the large one as a secondary drive in one of your main machines.
Install and carry a portable Linux operating system
A full OS you can boot anywhere, anytime
If you’ve always wanted an easy way to carry your own setup around but didn’t know how to do it, the answer could be that small-capacity NVMe SSD.
There are a few good reasons to install a portable Linux OS on it. You can use it for troubleshooting other people’s machines, development work, or just to have your own setup in your pocket that you can plug into almost any machine in a few minutes.
You technically don’t need to put the SSD into an enclosure for this to work, but it’s a lot more convenient if you do use one, as most modern machines support USB booting. And if you’ve used a thumb drive for this before, you’ll instantly notice how much faster an SSD-based setup is.
Use it as a dedicated scratch disk for fast transfers and temporary work files
Keep active workloads off your main drive
A small NVMe drive likely doesn’t have the capacity your workload demands. If you work with large video files, you’ll run out of space before you finish even a single project.
However, sometimes you just need a small amount of scratch space for temporary projects. In addition to storing my OS and apps, I also use that 128GB SSD in my laptop NAS for transferring small files between my phone and PC. It’s way faster than using a hard drive, especially because I don’t have to wait for it to spin up, and it’s also more convenient than transferring files directly to my PC since it doesn’t need to be turned on for that to work.
If you don’t have a NAS, you could try using an enclosure and plugging it into your router’s USB port to see if it works as a makeshift NAS. Alternatively, just plug it into an empty M.2 slot if you have one in your machine to keep your main drive less cluttered.
Store all your favorite lightweight games
A small but lightning-fast game library
Remember when games could be stored on tiny 1.44MB floppy disks? As it turns out, there are still plenty of smaller indie games on Steam that only take up a few gigabytes of space, if even that. This can be a perfect use case for a small NVMe SSD, as it’s all you need to create a curated selection of lighter games.
Once again, you can use an enclosure to keep this game library portable without sacrificing performance when playing directly off the SSD, or you can just use a spare M.2 slot if your PC has one. In fact, you might even be able to fit an older game or an esports title or two on that drive. You should never turn down extra space for games!
Even a small NVMe drive can still be surprisingly useful
If you’ve got an old NVMe lying around, you should stop treating it like outdated hardware just because it’s not large enough for a main drive anymore. With a bit of creativity, that old NVMe could easily turn into a snappy boot drive for your NAS or a powerful portable drive that transfers files between machines much faster than even doing it over LAN.



