This wearable gadget effectively soothes my migraines and headaches, and it’s under $50


renpho-eyeris-2-massager

Kayla Solino/ZDNET

Follow ZDNET: Add us as a preferred source on Google.


I spend a lot of time on the computer. 

I work remotely, and as ZDNET’s deals and shopping editor, I often work a decent amount of odd hours during the year: late nights during major holidays like Prime Day, early mornings during product event days in other countries, and so on. All that’s to say that my eyes take a beating from screen time, blue light exposure, and nitty-gritty writing and editing. 

Also: 5 last-minute gifts your mom will actually like for Mother’s Day (and all are on sale)

That’s why I was desperate to find anything to help alleviate the discomfort of headaches and eye fatigue. Taking over-the-counter medications doesn’t always cut it, and sometimes, the obvious solutions (more sleep, less stress, etc.) just aren’t feasible. I decided to try Renpho’s Eyeris 2 eye massager after one of my colleagues suggested it, and I was skeptical — but now this niche device is my go-to tool when I feel like my head and eyes are ready to tap out. 

My colleague, Allison Murray, owns the Eyeris 1 massager and finds it helpful for her headaches and migraines. She says it’s an excellent gift for friends and family members. After her recommendation, I tried it for myself. I entered the experience with an open mind, but I’ll admit I wasn’t expecting to find much use for an eye massager, let alone that it would make a noticeable difference. 

Also: These are the 5 weirdest wellness gadgets I never skip using – and how they work

The whole concept felt like a gimmick to me — the kind of product you would see on early 2000s infomercials after you woke up on the couch at 2 a.m., somewhere between the ads for the Betty Crocker Bake ‘n Fill pan and Tony Little’s Gazelle. 

But I was pleasantly surprised. 

renpho-eyeris-2-massager

The controls on the Eyeris 2. 

Kayla Solino/ZDNET

The Eyeris 2 is the upgraded massager from Renpho’s Eyeris 1, but the concept is the same. It slips over your head and is secured with an elastic band, allowing you to customize your massage session with various settings. It integrates massage, compression, and vibration, which I find is a nice bonus, as it also skims your temples. 

There are two adjustable compression intensity settings, as well as a heat option of 104 degrees or a toasting option of 113 degrees, to help alleviate eye puffiness, among other benefits. The heat settings on the Eyeris 2 are my favorite feature. It’s like a big hug for your eyes wrapped in a heated blanket, and it makes a big difference in soothing away aches. 

Also: There’s a right way to wear your Apple Watch – and it affects your data

There’s also Bluetooth, silent mode, and voice broadcast. I don’t use these features much at all, but it’s nice to have the option to turn on the speaker and stream your own music via the Eyeris 2. 

I was initially worried that I wouldn’t be able to control the device effectively without being able to see, but it’s been less of an issue than I thought. 

There are physical buttons for power/mode, compression, heat, and music/volume. Once you use the Eyeris a few times, it becomes easy, but the first few times I used it, I turned it on before placing it over my eyes. Just be sure to adjust the band first if you choose to go this route.

renpho-eyeris-2-massager

The back side of the Eyeris 2. 

Kayla Solino/ZDNET

It also features a rechargeable battery that Renpho claims lasts approximately one week of moderate daily use. I don’t use mine daily, but I don’t find myself needing to charge very often, although that will depend on how long you use the device and how frequently. 

Also: Health is Tim Cook’s defining legacy – and your Apple Watch proves it

The Renpho Eyeris 2 makes a uniquely fun gift for yourself or a loved one, and I also appreciate that it comes with its own storage bag to keep everything tidy and organized. It’s certainly not an essential tech product, but if you love a whacky wellness gadget like me, it’s a nice investment for your self-care. 

Please note that Renpho instructs users to remove any eye accessories before use (eyeglasses, contact lenses, false eyelashes, etc). Renpho also advises against using the Eyeris 2 massager if you have undergone corrective myopia surgery or have eye conditions such as glaucoma, cataracts, etc. If you’re unsure if an eye massager is safe for you, I recommend speaking with your optometrist or ophthalmologist before use. 

Why I recommend this product

I’m not saying you need to run out and buy this product. Perhaps it will be for you, and maybe it won’t — that’s fine. I personally have enjoyed using this eye massager and find it helps with headaches, tired and swollen eyes, and more. For me, it’s something extra I like to include as a part of my self-care routine, especially as a full-time WFH employee. 

Likely, this massager won’t cure all your ailments or be some magic product. Still, I am a firm believer in owning tech items — as whacky as they sometimes are — that can help generate a better commitment to mental and physical wellness, and Renpho’s eye massager does that for me.

Looking for the next best product? Get expert reviews and editor favorites with ZDNET Recommends.





Source link

Leave a Reply

Subscribe to Our Newsletter

Get our latest articles delivered straight to your inbox. No spam, we promise.

Recent Reviews


The first computer my family owned was an 80286 IBM clone, and it had lots of ports, none of which looked the same. There was a big 5-pin DIN for the keyboard, a serial port, a parallel port, a game port for our joystick, and of course, the VGA port for the monitor.

In comparison, a modern computer has much less diversity in the port department. Not only are there fewer types of ports, but the total number may be quite low as well. When we move to modern laptops, it can be much more minimalist. Some laptops have just a single port on the entire machine! Is this a bad thing? As with anything, the extremes are rarely ideal, but I’d say overall, this has been a pretty positive development for PCs.

The port explosion era was never sustainable

It was more like a port infection

You see, the reason we had so many ports for so long is that people kept inventing new interfaces to make up for the shortcomings of existing ones. However, instead of the newer, better interfaces making the old ones obsolete, they just became additive as perfectly summarized in this classic XKCD comic.

A comic illustrates how competing standards multiply: first showing 14 competing standards, then people agreeing to create one universal standard, followed by a final panel showing there are now 15 competing standards. Credit: Randall Munroe (CC-BY-NC)

In laptops, the need for so many ports reached ridiculous heights. In this video posted by X user PC Philanthropy, you can see his Sager/Clevo D9T absolutely packed with all the trimmings leading to a rather massive laptop.

It is undeniably a cool machine, but obviously goes against the principle of portable computing. Also, every port you install means power and space that could have been taken up by something else. That’s true for laptops and desktops.



















Quiz
8 Questions · Test Your Knowledge

PC ports and motherboard I/O
Trivia challenge

Think you know your USB from your PCIe? Put your connector knowledge to the test.

PortsStandardsHardwareConnectorsMotherboards

Which USB connector type is fully reversible, meaning it can be plugged in either way?

Correct! USB Type-C features a symmetrical oval design that lets you insert it in either orientation. Introduced in 2014, it has become the dominant connector for modern devices and supports everything from data transfer to video output and fast charging.

Not quite — the answer is USB Type-C. The older USB Type-A connector (the flat rectangular one) famously required you to flip it at least twice before getting it right. USB Type-C’s reversible design was one of its biggest selling points when it launched in 2014.

What does the ‘x16’ in a PCIe x16 slot refer to?

Exactly right! PCIe x16 means the slot has 16 data lanes, allowing significantly more bandwidth than smaller x1 or x4 slots. This is why discrete graphics cards almost always use x16 slots — they need that extra throughput to feed pixel data to your display.

Not quite — the ‘x16’ refers to the number of data lanes. More lanes mean more simultaneous data paths between the CPU and the card. Graphics cards use x16 slots because their massive data demands require all 16 of those lanes working together.

Which port on a motherboard is most commonly used to connect a display directly to the CPU’s integrated graphics?

That’s correct! The HDMI and DisplayPort connectors found on a motherboard’s rear I/O panel are wired directly to the CPU’s integrated graphics unit. If you have a discrete GPU installed, you should use that card’s outputs instead for best performance.

The right answer is the HDMI or DisplayPort connectors on the rear I/O panel. These ports bypass the discrete GPU entirely and tap into the CPU’s built-in graphics. It’s a common troubleshooting trap — plugging a monitor into the motherboard instead of the GPU and wondering why nothing works.

What is the primary function of the 24-pin ATX connector on a motherboard?

Spot on! The 24-pin ATX connector is the main power connector that delivers multiple voltage rails — including 3.3V, 5V, and 12V — from the power supply to the motherboard. Without it seated properly, your PC simply won’t power on at all.

The correct answer is delivering power from the PSU to the motherboard. The 24-pin ATX connector is the big wide plug you’ll find on every modern motherboard. It supplies several different voltage levels that the board distributes to components. PCIe cards get their supplemental power from separate 6- or 8-pin connectors directly from the PSU.

Which of the following rear I/O ports transmits both audio and video in a single cable and is most commonly found on modern motherboards?

Correct! HDMI carries both high-definition audio and video over a single cable, making it one of the most convenient display connectors available. It became standard on motherboards as integrated graphics improved, and modern versions support 4K and even 8K resolutions.

The answer is HDMI. VGA is analog-only and carries no audio, DVI-D is digital video only without audio, and S-Video is an older analog format. HDMI bundles both audio and video digitally, which is why it became the go-to connector for TVs, monitors, and motherboard rear panels alike.

What maximum theoretical data transfer speed does USB 3.2 Gen 2×2 support?

Impressive! USB 3.2 Gen 2×2 achieves 20 Gbps by using two 10 Gbps lanes simultaneously — that’s what the ‘2×2’ means. It requires a USB Type-C connector and is most commonly found on high-end motherboards, making it ideal for fast external SSDs.

The correct answer is 20 Gbps. The ‘2×2’ in the name is the key clue — it bonds two 10 Gbps channels together. USB naming got notoriously confusing around this era, with the same physical port potentially supporting very different speeds depending on the generation label printed in the spec sheet.

What is the role of the M.2 slot found on most modern motherboards?

Well done! M.2 is a compact form-factor slot that most commonly hosts NVMe SSDs, which connect via PCIe lanes for blazing-fast storage speeds. Some M.2 slots also support SATA-based SSDs and Wi-Fi/Bluetooth combo cards, making the slot surprisingly versatile.

The correct answer is housing compact storage drives or wireless cards. M.2 replaced the older mSATA standard and supports both PCIe NVMe drives and SATA drives depending on the slot’s keying. NVMe M.2 drives can achieve sequential read speeds many times faster than traditional SATA SSDs.

Which audio connector color on a standard PC rear I/O panel is designated for the main stereo line output to speakers or headphones?

That’s right! The green 3.5mm jack is the standard line-out port used for speakers and headphones in the PC audio color-coding scheme. Blue is line-in for recording, and pink is the microphone input — a color system that’s been consistent across PC motherboards for decades.

The correct answer is green. PC audio jacks follow a long-standing color convention: green for headphones and speakers, blue for line-in (recording from external sources), and pink for the microphone. It’s one of those legacy standards that has quietly persisted even as USB and digital audio have become more common.

Challenge Complete

Your Score

/ 8

Thanks for playing!

USB-C (almost) solved the problem

So close, but not quite there yet

Released to the public in the mid ’90s, USB came to the rescue. The “U” is for “Universal” and for the most part USB has lived up to that promise. Now there was one port that handled data and power. More importantly, USB is fully backwards compatible. So if you plug a USB 1.1 device into a modern USB port, it should work. Whether you can get software drivers for it is another story, but it will talk to the host device.

USB-C has proven to be less universal than I’d like, and the situation is still far better than it used to be. A single USB-C port on one of my laptops can act as a video output for just about anything, even an old VGA monitor.

A Macbook, CRT monitor, and iPad connected together. Credit: Sydney Louw Butler/How-To Geek

My smaller laptops don’t need special chargers anymore, and the latest laptops can pull 240W over USB-C, which is enough for all but the beefiest desktop replacement machines. There is no type of peripheral I can think of that doesn’t give you the option to use it over USB.

But the complaints aren’t so much that we only get USB these days, it’s more that we get so little of it.

Minimal I/O enables better hardware design

Harder, better, faster, stronger

When you only put a handful of USB-C ports on a mobile computer, you reap numerous benefits. The low profile of USB-C means the laptop can be thinner, and the frame can be a stronger and more rigid unibody design. Internally, you have room for more battery, larger performance components, or better cooling.

A green Apple MacBook Neo on display on a wooden table with a product sign behind it. Credit: Patrick Campanale / How-To Geek

It also means the internals can be simpler, and cheaper to design and fabricate, though whether those savings are passed on to customers is another story altogether.

Wireless and cloud-first workflows reduce physical dependency

I guess they are “air” ports

Perhaps the first sign of major change was when smartphones dropped headphone jacks, but the fact is that wireless technologies are now good enough for most peripheral and data connections. So, there’s no need to connect them directly to a port on a computer. Which, in turn, means that there’s no reason to have as many ports on the computer in the first place.

I can’t remember the last time I used a wired mouse or keyboard, and I only use Ethernet for devices that need extremely high speeds, low latency, or improved reliability. For normal day-to-day use, modern Wi-Fi is just fine. So while your laptop might not have as many wired ports on the outside, those wireless chips on the inside still give it numerous connectivity options for audio, input, and data transfer.

You could even make the same argument about storage to some extent, with many thin and light systems leaning on cloud storage to make up for a lack of ports to connect external storage.

MacBook Neo colors on a white background.

Operating System

macOS

CPU

A18 Pro

The MacBook Neo with the A18 Pro chip is Apple’s most affordable laptop yet, with all-day battery life and buttery-smooth performance in a thin and light profile.



The dongle backlash misses the bigger picture

The last bit of the port protest centers around dongles, but I never understood the complaints. Having one port that can be broken out into whatever ports you need using a little box is amazing. It makes ports optional and gives you the choice. If you never plug your laptop into anything, why deal with all the ports you’ll never use?

Likewise, if you only ever use ports with your laptop when you dock it at a desk, then you can just leave your dongle ready to go on your desk, but throwing a small dongle in your laptop sleeve or bag in case you might need it is a small price to pay for all the benefits of minimal IO.



Source link