GPUBreach exploit uses GPU memory bit-flips to achieve full system takeover


GPUBreach exploit uses GPU memory bit-flips to achieve full system takeover

Pierluigi Paganini
April 07, 2026

GPUBreach attack technique uses GPU memory bit-flips to escalate privileges and potentially take full control of a system.

New research shows that attacks like GPUBreach exploit RowHammer bit-flips in GPU memory (GDDR6) to go beyond data corruption. Attackers can use this technique to escalate privileges and, in some cases, gain full control of the system. Unlike earlier GPUHammer methods, this approach proves that GPU memory faults can directly impact CPU-level security, making the threat more serious.

“GPUBreach shows that GPU Rowhammer attacks can move beyond data corruption to real privilege escalation. By corrupting GPU page tables, an unprivileged CUDA kernel can gain arbitrary GPU memory read/write, and then chain that capability into CPU-side escalation by exploiting newly discovered memory-safety bugs in the NVIDIA driver.” reads the post published by the experts. “The result is system-wide compromise up to a root shell, without disabling IOMMU, unlike contemporary works, making GPUBreach a more potent threat.”

By targeting GPU page tables in memory, attackers can manipulate them through bit flips and gain full control over GPU memory.

Researchers overcame key challenges by locating page tables, efficiently filling memory, and placing them near vulnerable regions. This enables arbitrary read/write access, data theft (including cryptographic keys), and ML manipulation.

“Leakage of secret keys from NVIDIA cuPQC, a library used to accelerate post-quantum cryptography, when keys reside in GPU DRAM during operations such as key exchange.” continues the post. “By tampering with one branch in cuBLAS SASS in GPU memory, we universally drive accuracy down (for example from 80% accuracy to 0%), more stealthily than prior weight tampering attacks; we also showcase leakage of sensitive LLM weights.”

Critically, the attack can also escalate to CPU-level privileges, even with protections like input–output memory management unit (IOMMU) enabled, allowing attackers to gain root access and fully compromise the system.

GPUBreach, GDDRHammer, and GeForge all show that GPU Rowhammer can corrupt page tables and enable GPU-side privilege escalation. However, GPUBreach stands out because it also achieves CPU privilege escalation even with IOMMU enabled.

While GDDRHammer cannot reach CPU privilege escalation and GeForge requires disabling IOMMU, GPUBreach bypasses this protection by targeting bugs in the GPU driver. This allows attackers to gain root access without disabling key defenses, making it a more advanced and dangerous technique.

ECC can help mitigate Rowhammer by correcting single-bit errors and detecting double-bit flips, so enabling it on supported GPUs is recommended. However, it fails against multi-bit flips and may allow silent corruption. Consumer GPUs lack ECC, leaving them without effective protection.

“ECC is not a foolproof mitigation against GPUBreach.” concludes the researchers. “On desktop or laptop GPUs, where ECC is currently unavailable, there are no known mitigations to our knowledge”

Follow me on Twitter: @securityaffairs and Facebook and Mastodon

Pierluigi Paganini

(SecurityAffairs – hacking, newsletter)







Source link

Leave a Reply

Subscribe to Our Newsletter

Get our latest articles delivered straight to your inbox. No spam, we promise.

Recent Reviews


Google Maps has a long list of hidden (and sometimes, just underrated) features that help you navigate seamlessly. But I was not a big fan of using Google Maps for walking: that is, until I started using the right set of features that helped me navigate better.

Add layers to your map

See more information on the screen

Layers are an incredibly useful yet underrated feature that can be utilized for all modes of transport. These help add more details to your map beyond the default view, so you can plan your journey better.

To use layers, open your Google Maps app (Android, iPhone). Tap the layer icon on the upper right side (under your profile picture and nearby attractions options). You can switch your map type from default to satellite or terrain, and overlay your map with details, such as traffic, transit, biking, street view (perfect for walking), and 3D (Android)/raised buildings (iPhone) (for buildings). To turn off map details, go back to Layers and tap again on the details you want to disable.

In particular, adding a street view and 3D/raised buildings layer can help you gauge the terrain and get more information about the landscape, so you can avoid tricky paths and discover shortcuts.

Set up Live View

Just hold up your phone

A feature that can help you set out on walks with good navigation is Google Maps’ Live View. This lets you use augmented reality (AR) technology to see real-time navigation: beyond the directions you see on your map, you are able to see directions in your live view through your camera, overlaying instructions with your real view. This feature is very useful for travel and new areas, since it gives you navigational insights for walking that go beyond a 2D map.

To use Live View, search for a location on Google Maps, then tap “Directions.” Once the route appears, tap “Walk,” then tap “Live View” in the navigation options. You will be prompted to point your camera at things like buildings, stores, and signs around you, so Google Maps can analyze your surroundings and give you accurate directions.

Download maps offline

Google Maps without an internet connection

Whether you’re on a hiking trip in a low-connectivity area or want offline maps for your favorite walking destinations, having specific map routes downloaded can be a great help. Google Maps lets you download maps to your device while you’re connected to Wi-Fi or mobile data, and use them when your device is offline.

For Android, open Google Maps and search for a specific place or location. In the placesheet, swipe right, then tap More > Download offline map > Download. For iPhone, search for a location on Google Maps, then, at the bottom of your screen, tap the name or address of the place. Tap More > Download offline map > Download.

After you download an area, use Google Maps as you normally would. If you go offline, your offline maps will guide you to your destination as long as the entire route is within the offline map.

Enable Detailed Voice Guidance

Get better instructions

Voice guidance is a basic yet powerful navigation tool that can come in handy during walks in unfamiliar locations and can be used to ensure your journey is on the right path. To ensure guidance audio is enabled, go to your Google Maps profile (upper right corner), then tap Settings > Navigation > Sound and Voice. Here, tap “Unmute” on “Guidance Audio.”

Apart from this, you can also use Google Assistant to help you along your journey, asking questions about your destination, nearby sights, detours, additional stops, etc. To use this feature on iPhone, map a walking route to a destination, then tap the mic icon in the upper-right corner. For Android, you can also say “Hey Google” after mapping your destination to activate the assistant.

Voice guidance is handy for both new and old places, like when you’re running errands and need to navigate hands-free.

Add multiple stops

Keep your trip going

If you walk regularly to run errands, Google Maps has a simple yet effective feature that can help you plan your route in a better way. With Maps’ multiple stop feature, you can add several stops between your current and final destination to minimize any wasted time and unnecessary detours.

To add multiple stops on Google Maps, search for a destination, then tap “Directions.” Select the walking option, then click the three dots on top (next to “Your Location”), and tap “Edit Stops.” You can now add a stop by searching for it and tapping “Add Stop,” and swap the stops at your convenience. Repeat this process by tapping “Add Stops” until your route is complete, then tap “Start” to begin your journey.

You can add up to ten stops in a single route on both mobile and desktop, and use the journey for multiple modes (walking, driving, and cycling) except public transport and flights. I find this Google Maps feature to be an essential tool for travel to walkable cities, especially when I’m planning a route I am unfamiliar with.


More to discover

A new feature to keep an eye out for, especially if you use Google Maps for walking and cycling, is Google’s Gemini boost, which will allow you to navigate hands-free and get real-time information about your journey. This feature has been rolling out for both Android and iOS users.



Source link