You’re wasting money on audiophile cables, new tests suggest


You’re wasting money on audiophile cables, new tests suggest. A controlled comparison between a budget RCA cable and a boutique model priced in the thousands found no real change in sound quality.

That conclusion comes from lab-grade measurements paired with listening checks. The findings push back on a long-held belief that pricier cables unlock better audio.

In this test, a roughly $7 Amazon Basics RCA cable went up against a high-end option costing over $4,000. Despite the huge gap in price, both delivered the same results in measurements and listening scenarios.

Lab tests show identical performance

The clearest evidence comes from controlled measurements using professional analyzer hardware. Both cables were evaluated for distortion, noise, and frequency handling under the same conditions.

With a 4 kHz signal, each cable introduced only minimal distortion, with no meaningful separation between them. The more expensive option even picked up slightly more electrical noise in that run, though the difference didn’t matter in real use.

Across a wider range, the pattern held steady. Frequency response matched, phase behavior stayed aligned, and signal transitions showed no practical difference. Even highly zoomed-in analyzer graphs failed to show any real deviation between the two.

Jitter testing followed the same trend. The cheaper cable showed a tiny increase, but it was measured in extremely small units and came with a caveat, it was also longer than the premium cable.

Why the myth still sticks

So why does this belief keep circulating? Much of it comes down to perception and expectation.

Listeners can feel like they hear differences during casual listening, especially when they know which product they’re using. But those impressions tend to fade in blind comparisons, where bias is removed.

There’s also the appeal of premium materials and technical language. High-end cables highlight features like silver conductors or specialized insulation, which sound convincing but didn’t produce audible gains here.

Some design choices can even add downsides. The expensive cable in this test used a locking connector that adds complexity and potential risk without improving signal delivery.

Where your money matters more

If cables aren’t the problem, the rest of your system likely is.

The results reinforce that RCA cables already operate comfortably within their limits. They carry audio with low noise, low distortion, and wide bandwidth, so they aren’t holding your setup back.

Real improvements come from other parts of the chain. Speakers, amplifiers, room acoustics, and source quality have a far greater impact on what you actually hear.

Spending thousands on a cable doesn’t just bring diminishing returns, it brings none in measurable terms. That makes it one of the least effective upgrades you can make.

Stick with a reliable, well-built cable and put the rest of your budget into gear that actually changes the listening experience.



Source link

Leave a Reply

Subscribe to Our Newsletter

Get our latest articles delivered straight to your inbox. No spam, we promise.

Recent Reviews


Google Maps has a long list of hidden (and sometimes, just underrated) features that help you navigate seamlessly. But I was not a big fan of using Google Maps for walking: that is, until I started using the right set of features that helped me navigate better.

Add layers to your map

See more information on the screen

Layers are an incredibly useful yet underrated feature that can be utilized for all modes of transport. These help add more details to your map beyond the default view, so you can plan your journey better.

To use layers, open your Google Maps app (Android, iPhone). Tap the layer icon on the upper right side (under your profile picture and nearby attractions options). You can switch your map type from default to satellite or terrain, and overlay your map with details, such as traffic, transit, biking, street view (perfect for walking), and 3D (Android)/raised buildings (iPhone) (for buildings). To turn off map details, go back to Layers and tap again on the details you want to disable.

In particular, adding a street view and 3D/raised buildings layer can help you gauge the terrain and get more information about the landscape, so you can avoid tricky paths and discover shortcuts.

Set up Live View

Just hold up your phone

A feature that can help you set out on walks with good navigation is Google Maps’ Live View. This lets you use augmented reality (AR) technology to see real-time navigation: beyond the directions you see on your map, you are able to see directions in your live view through your camera, overlaying instructions with your real view. This feature is very useful for travel and new areas, since it gives you navigational insights for walking that go beyond a 2D map.

To use Live View, search for a location on Google Maps, then tap “Directions.” Once the route appears, tap “Walk,” then tap “Live View” in the navigation options. You will be prompted to point your camera at things like buildings, stores, and signs around you, so Google Maps can analyze your surroundings and give you accurate directions.

Download maps offline

Google Maps without an internet connection

Whether you’re on a hiking trip in a low-connectivity area or want offline maps for your favorite walking destinations, having specific map routes downloaded can be a great help. Google Maps lets you download maps to your device while you’re connected to Wi-Fi or mobile data, and use them when your device is offline.

For Android, open Google Maps and search for a specific place or location. In the placesheet, swipe right, then tap More > Download offline map > Download. For iPhone, search for a location on Google Maps, then, at the bottom of your screen, tap the name or address of the place. Tap More > Download offline map > Download.

After you download an area, use Google Maps as you normally would. If you go offline, your offline maps will guide you to your destination as long as the entire route is within the offline map.

Enable Detailed Voice Guidance

Get better instructions

Voice guidance is a basic yet powerful navigation tool that can come in handy during walks in unfamiliar locations and can be used to ensure your journey is on the right path. To ensure guidance audio is enabled, go to your Google Maps profile (upper right corner), then tap Settings > Navigation > Sound and Voice. Here, tap “Unmute” on “Guidance Audio.”

Apart from this, you can also use Google Assistant to help you along your journey, asking questions about your destination, nearby sights, detours, additional stops, etc. To use this feature on iPhone, map a walking route to a destination, then tap the mic icon in the upper-right corner. For Android, you can also say “Hey Google” after mapping your destination to activate the assistant.

Voice guidance is handy for both new and old places, like when you’re running errands and need to navigate hands-free.

Add multiple stops

Keep your trip going

If you walk regularly to run errands, Google Maps has a simple yet effective feature that can help you plan your route in a better way. With Maps’ multiple stop feature, you can add several stops between your current and final destination to minimize any wasted time and unnecessary detours.

To add multiple stops on Google Maps, search for a destination, then tap “Directions.” Select the walking option, then click the three dots on top (next to “Your Location”), and tap “Edit Stops.” You can now add a stop by searching for it and tapping “Add Stop,” and swap the stops at your convenience. Repeat this process by tapping “Add Stops” until your route is complete, then tap “Start” to begin your journey.

You can add up to ten stops in a single route on both mobile and desktop, and use the journey for multiple modes (walking, driving, and cycling) except public transport and flights. I find this Google Maps feature to be an essential tool for travel to walkable cities, especially when I’m planning a route I am unfamiliar with.


More to discover

A new feature to keep an eye out for, especially if you use Google Maps for walking and cycling, is Google’s Gemini boost, which will allow you to navigate hands-free and get real-time information about your journey. This feature has been rolling out for both Android and iOS users.



Source link