I cracked open cheap charging gadgets from Temu – and it was worse than I expected


My Temu haul.

Adrian Kingsley-Hughes/ZDNET

Follow ZDNET: Add us as a preferred source on Google.


ZDNET’s key takeaways

  • I bought a bunch of stuff from Temu at “too good to be true” prices.
  • Most of the products were defective or badly made.
  • All these products were listed as bestsellers.

Everyone loves a bargain, but as my grandfather used to say, things can be “too good to be true.” Then you’re stuck in that awkward spot of “buy cheap, buy twice.”

Outlets like Temu seem to offer an unlimited oasis of cheap and cheerful stuff, and not a week goes by without someone asking me what I think about the quality of the electronic gadgets and gear from these places.

Also: My 6 favorite Bluetooth gadgets that make life easier (and are worth every penny)

Well, there’s only one way to find out. I put my money where my mouth is, spent some of my pocket money on tech essentials, and waited patiently for them to be delivered so I could see what I got.

Disclosure: For many years, I’ve liaised with UK Trading Standards officers to get counterfeit, unsafe, and dangerous products removed from sale. All my findings from these purchases will be forwarded to the authorities.

I ordered a selection of items that people might want: a power bank, a mains charger, a travel adapter, a charging station, and a charging cable. I picked items that were suggested to me and advertised as “best sellers.” I then tested and tore them apart to see what made them tick. Based on this (albeit limited) sampling of items, it was a pretty dismal experience.

ZDNET has reached out to Temu, but so far, the company has not responded to a request for comment.

“10,000mAh” power bank

The listing for the 10,000mAh power bank

The listing for the 10,000mAh power bank

Adrian Kingsley-Hughes/ZDNET

Let’s start with the power bank. This is the type with the fake display (a printed bit of plastic with a backlight) that charges using microUSB. I ordered a 10,000mAh version, but I was supplied with one claiming to be 20,000mAh. A bargain, right?

Wrong.

When I received the power bank, it initially seemed to work fine but then suddenly stopped working. At this point, I hadn’t even used it once, so the bargain price of $5.56 for what wasn’t even a single-use power bank seemed steep.

Also: 10 useful gadgets that seriously upgraded my smart home (and some are discounted)

On opening it up, I immediately found out why it wasn’t working. One of the wires had popped off the battery. It hadn’t been soldered in place but was instead folded between the tabs of the battery. This is not great because a loose wire could cause a short circuit, fire, or even an explosion.

This wire wasn't even soldered in place!

This wire wasn’t even soldered in place!

Adrian Kingsley-Hughes/ZDNET

But it got worse.

The battery wasn’t new but salvaged from something else. It had no names or markings on it, and it definitely wasn’t a 10,000mAh or 20,000mAh pack (I later measured it at about 7,000mAh). It also showed signs of damage on the corners and the main body, which makes it risky.

This is a battery that's been salvaged from something else, and it shows signs of damage.

This is a battery that’s been salvaged from something else, and it shows signs of damage.

Adrian Kingsley-Hughes/ZDNET

Also, inside the power bank was a lump of steel.

A lump of steel inside the power bank.

A lump of steel inside the power bank.

Adrian Kingsley-Hughes/ZDNET

Why a lump of steel, you might ask? Sketchy manufacturers do this to add weight to a product that might otherwise feel suspiciously light.

Bottom line: Terrible product.

Alternative: Pick up something like the Cuktech 20,000mAh power bank for $27.

Smart charge adapter

Smart Charger Adapter listing

Smart Charger Adapter listing

Adrian Kingsley-Hughes/ZDNET

This four-port (two USB-A and two USB-C) power adapter seems like a great buy for $8.50 — until you realize it’s only listed as a 10W adapter. It’s even less of a great deal when you discover it can barely push out 10W with one port in use and fails completely when multiple devices are connected.

Also: Why I trust these $5 USB-C connectors to power my most expensive tech gadgets

Another issue is that the case separated from the plug easily. I just had to give it a little squeeze with pliers. This is a safety hazard if it happens while the unit is plugged into a socket.

The case didn't take much persuasion to come apart!

The case didn’t take much persuasion to come apart!

Adrian Kingsley-Hughes/ZDNET

From an electrical safety point of view, I’d call this acceptable, but as a usable charger, it’s pretty poor.

This is an acceptable product from a safety point of view.

This is an acceptable product from a safety point of view.

Adrian Kingsley-Hughes/ZDNET

Bottom line: Avoid.

Alternative: You can pick up a decent 50W/4-port Anker Zolo power adapter for $30.

Travel adapter

Travel Adapter listing

Adrian Kingsley-Hughes/ZDNET

This was one of the better products, but at $9.80, it’s not cheap. It features an EU plug on the back and a UK socket on the front, claiming to be rated for 3,250W. I tested it at this pass-through voltage, and it could handle the load, but the prongs got hot. I wouldn’t recommend using it at this load for long.

Kinked wires like this can cause overheating.

Kinked wires like this can cause overheating.

Adrian Kingsley-Hughes/ZDNET

I also found a kinked wire inside the unit — this can cause overheating — and some examples of very bad circuit board soldering.

Also: 9 useful car gadgets I’d pay full price for (but some are on sale now)

Some sketchy soldering.

Adrian Kingsley-Hughes/ZDNET

The dual USB ports (one USB-A and one USB-C) can output a maximum of 12W, and it achieved this when one or both ports were in use. However, I found the USB-C output to be far from stable, which could cause issues when charging some devices.

Bottom line: Not the worst thing I’ve seen, but I’d still avoid it.

Alternative: The excellent Anker Nano 20W/5-Port Travel Adapter is only $26.

12-port charging station

12-Port Charging Station listing

12-Port Charging Station listing

Adrian Kingsley-Hughes/ZDNET

This 12-port charging station features six USB-A and six USB-C ports. The problem is that the unit has a USB-A plug on the end, and inside, there’s no power management. It’s just a splitter for whatever power outlet you connect it to, which won’t exceed 30W. Because of this, you’ll never be able to charge a dozen devices simultaneously. In fact, with more than one device plugged in, charging became erratic.

Some ugly soldering here.

Some ugly soldering here.

Adrian Kingsley-Hughes/ZDNET

Power management ensures that each connected device receives the appropriate amount of power without overloading the charger or causing erratic charging behavior. Chargers without proper power management, like this one, can lead to overheating, device damage, or inefficient charging.

Also: I found 20+ tiny gadgets that can handle big tasks (and they’re under $50)

No control circuitry means there's no way this could effectively handle a dozen devices.

No control circuitry means there’s no way this could effectively handle a dozen devices.

Adrian Kingsley-Hughes/ZDNET

On the plus side, this charging station was better constructed than the power adapter and took more effort to open up.

Bottom line: It’s not harmful but doesn’t do much either.

Alternative: If you need to charge a dozen devices simultaneously, pick up two 100W Tessan charging stations. Each has three USB-A and three USB-C ports and costs $37.

3-foot 60W USB-A to USB-C nylon braided charging cable

3-Foot 60W USB-A to USB-C Nylon Braided Charging Cable listing

3-Foot 60W USB-A to USB-C Nylon Braided Charging Cable listing

Adrian Kingsley-Hughes/ZDNET

A cable is just a cable, right? Well, yes and no.

This cable is rated for 60W, but it will only carry this wattage under specific circumstances. You’d need a Qualcomm Quick Charge 2.0/3.0 charger, a compatible device, and a high-quality cable. Delving into the specs, a “high-quality cable” must have wires that are 20 AWG or thicker. This one doesn’t, so it’s susceptible to overheating at high wattages.

These wires are far thinner than 20AWG, so couldn't handle 60W of power safely.

These wires are far thinner than 20AWG, so couldn’t handle 60W of power safely.

Adrian Kingsley-Hughes/ZDNET

Another issue is that the metal caps on the ends of the cable came off easily, and the strain relief wasn’t effective.

Also: 3 tiny gadgets I trust to block electrical surges, data-stealing software, and more

The metal ends fell off in no time.

The metal ends fell off in no time.

Adrian Kingsley-Hughes/ZDNET

Bottom line: Since this cable cost less than $2, I wasn’t expecting much, but it isn’t suitable for 60W.

Alternative: If you need a USB-A to USB-C cable that can handle 60W, try the Chubbycable Chubby 2.0, a well-made cable for $19.

How to avoid bad tech products

Want to avoid products that might stop working prematurely or fail in potentially dangerous ways? Here are my top tips:

  • Stick with quality brands. Not sure what’s a quality brand? Google it.
  • Avoid overly generic branding: Products with no clear branding or overly generic names are often low-quality or counterfeit.
  • Look for badly Photoshopped or AI-generated product photos. Typos are also a real giveaway.
  • "Overlaod Proteoted"

    Adrian Kingsley-Hughes/ZDNET
  • If it seems too cheap, it probably is. If you’re unsure what’s a decent price, check Amazon, Walmart, or BestBuy.
  • Take reviews on sites like Temu with a grain of salt. I’m always surprised how products I’ve tested and found to be bad have loads of great reviews, which suggests manipulation or incentivized content.
  • Check for certifications: Look for safety certifications like CE, FCC, or UL on electronic products. These indicate that the product meets basic safety standards (although these can be faked).
  • Read independent reviews: Sites like ZDNET and CNET test and rank products, providing unbiased insights.





Source link

Leave a Reply

Subscribe to Our Newsletter

Get our latest articles delivered straight to your inbox. No spam, we promise.

Recent Reviews


Google Maps has a long list of hidden (and sometimes, just underrated) features that help you navigate seamlessly. But I was not a big fan of using Google Maps for walking: that is, until I started using the right set of features that helped me navigate better.

Add layers to your map

See more information on the screen

Layers are an incredibly useful yet underrated feature that can be utilized for all modes of transport. These help add more details to your map beyond the default view, so you can plan your journey better.

To use layers, open your Google Maps app (Android, iPhone). Tap the layer icon on the upper right side (under your profile picture and nearby attractions options). You can switch your map type from default to satellite or terrain, and overlay your map with details, such as traffic, transit, biking, street view (perfect for walking), and 3D (Android)/raised buildings (iPhone) (for buildings). To turn off map details, go back to Layers and tap again on the details you want to disable.

In particular, adding a street view and 3D/raised buildings layer can help you gauge the terrain and get more information about the landscape, so you can avoid tricky paths and discover shortcuts.

Set up Live View

Just hold up your phone

A feature that can help you set out on walks with good navigation is Google Maps’ Live View. This lets you use augmented reality (AR) technology to see real-time navigation: beyond the directions you see on your map, you are able to see directions in your live view through your camera, overlaying instructions with your real view. This feature is very useful for travel and new areas, since it gives you navigational insights for walking that go beyond a 2D map.

To use Live View, search for a location on Google Maps, then tap “Directions.” Once the route appears, tap “Walk,” then tap “Live View” in the navigation options. You will be prompted to point your camera at things like buildings, stores, and signs around you, so Google Maps can analyze your surroundings and give you accurate directions.

Download maps offline

Google Maps without an internet connection

Whether you’re on a hiking trip in a low-connectivity area or want offline maps for your favorite walking destinations, having specific map routes downloaded can be a great help. Google Maps lets you download maps to your device while you’re connected to Wi-Fi or mobile data, and use them when your device is offline.

For Android, open Google Maps and search for a specific place or location. In the placesheet, swipe right, then tap More > Download offline map > Download. For iPhone, search for a location on Google Maps, then, at the bottom of your screen, tap the name or address of the place. Tap More > Download offline map > Download.

After you download an area, use Google Maps as you normally would. If you go offline, your offline maps will guide you to your destination as long as the entire route is within the offline map.

Enable Detailed Voice Guidance

Get better instructions

Voice guidance is a basic yet powerful navigation tool that can come in handy during walks in unfamiliar locations and can be used to ensure your journey is on the right path. To ensure guidance audio is enabled, go to your Google Maps profile (upper right corner), then tap Settings > Navigation > Sound and Voice. Here, tap “Unmute” on “Guidance Audio.”

Apart from this, you can also use Google Assistant to help you along your journey, asking questions about your destination, nearby sights, detours, additional stops, etc. To use this feature on iPhone, map a walking route to a destination, then tap the mic icon in the upper-right corner. For Android, you can also say “Hey Google” after mapping your destination to activate the assistant.

Voice guidance is handy for both new and old places, like when you’re running errands and need to navigate hands-free.

Add multiple stops

Keep your trip going

If you walk regularly to run errands, Google Maps has a simple yet effective feature that can help you plan your route in a better way. With Maps’ multiple stop feature, you can add several stops between your current and final destination to minimize any wasted time and unnecessary detours.

To add multiple stops on Google Maps, search for a destination, then tap “Directions.” Select the walking option, then click the three dots on top (next to “Your Location”), and tap “Edit Stops.” You can now add a stop by searching for it and tapping “Add Stop,” and swap the stops at your convenience. Repeat this process by tapping “Add Stops” until your route is complete, then tap “Start” to begin your journey.

You can add up to ten stops in a single route on both mobile and desktop, and use the journey for multiple modes (walking, driving, and cycling) except public transport and flights. I find this Google Maps feature to be an essential tool for travel to walkable cities, especially when I’m planning a route I am unfamiliar with.


More to discover

A new feature to keep an eye out for, especially if you use Google Maps for walking and cycling, is Google’s Gemini boost, which will allow you to navigate hands-free and get real-time information about your journey. This feature has been rolling out for both Android and iOS users.



Source link