TACEO launches its private execution network



The TACEO Network, already live inside World ID’s biometric verification system for more than 18 million users, lets organisations share digital infrastructure without sharing sensitive data.

When Sam Altman’s World needs to verify that a new user’s iris hasn’t already been registered, it faces a peculiar problem. The computation has to happen on encrypted data, all the way through.

That is what the Austrian startup TACEO has been building since 2022. On Thursday, the Graz-based company announced the launch of the TACEO Network, a private execution layer for shared digital infrastructure covering identity, finance, and AI agents, and revealed that its cryptographic infrastructure is already live inside World ID, handling biometric verification for more than 18 million users across 160 countries.

The problem TACEO is addressing is structural. Organisations increasingly want to participate in shared digital systems, common payment rails, interoperable identity networks, multi-party financial workflows, but cannot afford to expose the sensitive parts of those workflows to other participants or to a central operator.

The usual workaround is to keep the sensitive processing in-house: an internal system handles the identity checks, the fraud scoring, the routing logic, while everything else runs on shared infrastructure.

That concentrates risk, multiplies compliance headaches, and means the benefits of shared systems never fully materialise.

TACEO’s answer is a private execution layer that sits beneath shared infrastructure. The underlying technology combines two advanced cryptographic approaches. Multiparty Computation, MPC, allows multiple nodes to jointly compute a function on encrypted data without any single node ever seeing the unencrypted inputs.

Zero-Knowledge Proofs allow a party to prove that a computation was carried out correctly without revealing what the data actually was. TACEO combines both into what it calls coSNARKs: collaborative SNARKs that let distributed nodes not only process encrypted data together but generate a verifiable proof that they did so correctly. The result is computation that is both private and auditable.

TACEO was founded in 2022 by a team of cryptography researchers from Graz University of Technology. CEO Lukas Helminger was a cryptography researcher and lecturer there and a contributor to the Austrian Defence Department.

The team’s academic credentials are substantial: co-founder and Chief Scientist Christian Rechberger is a professor at TU Graz and co-designer of the Poseidon hash function, now a de facto standard in zero-knowledge cryptography systems.

The company also raised a $5.5 million seed round in July 2025, led by Archetype VC, with participation from a16z CSX, the crypto accelerator arm of Andreessen Horowitz, which TACEO joined in 2024.

The TACEO Network is operated by a distributed set of node operators including Nethermind, a well-known Ethereum infrastructure company, and the Faculty of Electrical Engineering at Czech Technical University in Prague.

Nodes run across the US, Europe, and Asia, according to the company. The distributed node architecture is central to the security model: because no single operator controls the full computation, no single actor, including TACEO itself, can access the underlying data.

“For decades we’ve had to choose between two models: either sensitive data stays private inside one organisation, or it becomes visible in shared systems,” said Helminger in a statement. “With the launch of the TACEO Network, that trade-off starts to disappear. Computation can run across independent operators while the data itself stays encrypted.”

The 18 million user figure cited in the launch is an update from the 14 million cited at the time of the July 2025 seed round, suggesting continued growth in World ID’s deployed base.

The 18 million and 160 countries figures come from TACEO’s press materials and have not been independently verified, though the direction of growth is consistent with World’s public expansion trajectory.

The broader ambition extends well beyond biometrics. As stablecoins push digital settlement towards the mainstream and AI agents create new machine-to-machine use cases, the need for shared digital rails that can handle sensitive logic without centralising it is growing.

TACEO’s argument is that its private execution layer is the missing infrastructure piece, the layer that lets financial institutions, identity providers, and AI systems coordinate on shared networks without handing control of sensitive data to a single party.

Whether that argument translates into enterprise adoption at scale is the question the TACEO Network now has to answer.



Source link

Leave a Reply

Subscribe to Our Newsletter

Get our latest articles delivered straight to your inbox. No spam, we promise.

Recent Reviews


Spotify aims to provide a consistent listening experience that uses minimal data. As a result, your audio quality might be less than ideal, especially if you’re using a pair of high-fidelity headphones or high-end speakers. Here’s how to fix that.

Switch audio streaming quality to Very High or Lossless

The default audio streaming quality in both the mobile and desktop Spotify apps is set to Automatic, which usually keeps the audio quality at Normal, which is only 96 Kbps. Even though Spotify uses the Ogg Vorbis codec, which is superior to MP3, OGG files exhibit slight (but noticeable) digital noise, poor bass detail, dull treble, and a narrow soundstage at 96 Kbps.

Even worse, Spotify is aggressive about adjusting the automatic bitrate. Even though 4G is more than fast enough to stream high-quality OGG files, even with a weak signal, Spotify may still drop the quality to Low, which has a bitrate of just 24 Kb/s. You will notice such a sharp drop in quality, even on a pair of bottom-of-the-barrel headphones.

To rectify this, open the Spotify app, tap your user image, open “Settings and privacy,” and tap the “Media Quality” menu. Once there, set Wi-Fi streaming quality and cellular streaming quality to “Very high” or “Lossless.”

I recommend setting cellular streaming quality to Very high and reserving Lossless for Wi-Fi, since lossless streaming is very data-intensive. One hour of streaming lossless files can take up to 1GB of data, as well as a good chunk of your phone’s storage, because Spotify caches files you’re frequently streaming. Besides, you’ll struggle to notice the difference unless you’re listening to music on a wired pair of high-end headphones or speakers; wireless connection just doesn’t have the bandwidth needed to convey the full fidelity of Spotify lossless audio.

You might opt for High quality if you have a capped data plan, but I recommend doing so only if you stream hours upon hours’ worth of music every single day over a cellular network. For instance, I burn through about 8 GB of data per month on average while streaming about two hours of very high-quality music over a cellular network each day.

Illustration of a headphone with various music icons around.


How Audio Compression Works and Why It Can Affect Your Music Quality

Feeling the squeeze when listening to your favorite song?

Set audio download quality to Very high or Lossless

If you tend to download songs and albums for offline listening, you should also set the audio download quality to “Very high” or “Lossless.” This setting is located just under the audio streaming quality section.

The audio download quality menu in Spotify's mobile app.

If you’ve got enough free storage on your phone, opt for the latter, but if you’d rather save storage space, set it to Very high. You’ll hardly hear the difference, but lossless files are about five times larger than the 320 Kb/s OGG files Spotify offers at its Very high quality setting, and they can quickly fill up your phone’s storage.

Adjust video streaming quality at your discretion

The last section of the Media quality menu is Video streaming quality. This sets the quality of video podcasts and music videos available for certain songs. Since I care about neither, I set it to “Very high” on Wi-Fi and “Normal” on cellular, but you should tweak the two options at your discretion because songs sound notably better at higher video streaming quality levels.

If you often watch videos over cellular and have unlimited data, feel free to toggle video quality to very high.

Make sure Data Saver mode is disabled

Even if your audio quality is set to Very high or Lossless, Spotify will switch to low-quality streaming if the app’s Data saver mode is enabled. This option is located in the Data saving and offline menu. Open the menu, then set it to “Always off,” or choose “Automatic” to have Spotify’s Data Saver mode kick in alongside your phone’s Data Saver mode.

You can also enable volume normalization and play around with the built-in equalizer

Spotify logo in the center of the screen with an equalizer in front. Credit: Lucas Gouveia / How-To Geek

Last but not least, there are two additional features you can play with to improve your listening experience. The first is volume normalization, which sets the same loudness for every track you’re listening to. This can be handy because different albums are mastered at different loudness levels, with newer music usually being louder.

Since I’m an album-oriented listener, I keep the option disabled. I can just play an album and set the audio volume accordingly, and I don’t really mind louder songs when listening to playlists, artists, or song radios.

But if you can’t stand one song being quiet and the next rattling the windows, visit the Playback menu, enable “Volume normalization,” and set it to “Quiet” or “Normal.” The “Loud” option can digitally compress files, and neither Spotify nor I recommend using it. This also happens with “Quiet” and “Normal,” since both adjust the decibel level of the master recording for each song, but the compression level is much lower and extremely hard to notice.

Before I end this, I should also mention that you can access the equalizer directly from the Spotify app, where you can fine-tune your music listening experience or pick one of the available equalizer presets. If your phone has a built-in equalizer, Spotify will open it; if it doesn’t, you can use Spotify’s. On my phone (a Samsung Galaxy S21 FE), I can only use One UI’s built-in equalizer.

To open the equalizer, open “Playback,” then hit the “Equalizer” button. Now you can equalize your audio to your heart’s content.


Adjusting just a few settings can have a drastic impact on your Spotify listening experience. If you aren’t satisfied with Spotify’s sound quality, make sure to adjust the audio before jumping ship. You should also check the sound quality settings from time to time, as Spotify can reset them during app updates.​​​​​​​

Three phones with a Spotify screen and the logo in the center.


These 8 Spotify Features Are My Favorite Hidden Gems

Look for these now.



Source link