Microsoft has been on a roll recently, bringing new Windows 11 features left and right. The latest one to reach general availability (meaning it’s available to every Windows 11 user, not just Windows Insiders) is called point-in-time restore, and from what I’ve seen, it’s essentially a modern take on System Restore, which has been around for more than a quarter of a century, first debuting with Windows ME back in 2000.
So, what is point-in-time restore, how does it stack up against System Restore, and what’s the deal with that 200GB catch? Find out below.
What is point-in-time restore?
Like System Restore, but better
Point-in-time restore is the latest feature to hit Windows 11. It’s a new recovery feature that aims to simplify the process of restoring your PC after a software issue, bad driver, or, say, a faulty update causes problems, even if you can’t boot into Windows. The feature is based on the Volume Shadow Copy Service (VSS), the same technology used by System Restore.
VSS automatically creates restore points at regular intervals. From what I’ve seen on my PC, a new restore point is created about every 24 hours, which matches Microsoft’s claims and lets you restore your PC to an earlier state that includes system files, settings, and user files. Restore points created by System Restore, on the other hand, don’t include user files. Point-in-time restore also automatically deletes restore points after 72 hours, minimizing the feature’s impact on storage.
The best thing about point-in-time restore, and arguably its biggest advantage over System Restore, is that it’s not only integrated into Windows Settings (System > Recovery), but it’s also enabled by default, as long as your Windows volume is larger than 200GB. And there’s the catch: if your Windows volume is smaller than 200GB, you’ll have to enable the feature manually.
On the flip side, System Restore is tucked away in the Control Panel and isn’t enabled by default. You also have to enable System Protection before System Restore starts creating restore points automatically, whereas point-in-time restore creates them automatically as long as it’s enabled.
There are some other differences between the new and the old recovery feature as well. For instance, point-in-time restore integrates with Reserved Storage (a Windows feature that sets aside a portion of your disk space for Windows updates, temporary files, and system processes), while System Restore doesn’t. This means restore points created by System Restore take up regular disk space, potentially resulting in a larger storage footprint.
Point-in-time restore should also gain robust remote management capabilities in future updates, including support for Microsoft Intune recovery, whereas System Restore won’t improve upon its limited remote management options. Lastly, point-in-time restore should also provide faster recovery, often measured in minutes. Unlike System Restore, however, point-in-time restore only works with the system volume, whereas System Restore can create restore points for multiple volumes.
- OS
-
Windows, macOS, iPhone, iPad, Android
- Brand
-
Microsoft
Microsoft 365 includes access to Office apps like Word, Excel, and PowerPoint on up to five devices, 1 TB of OneDrive storage, and more.
Here’s how to get access to point-in-time restore
All you need is a single update
The good news is that point-in-time restore is available on both Windows 11 Home and Pro editions. All you need to do is install the optional Preview Update KB5095093. As of this writing, it’s an optional update, but point-in-time restore will eventually be included in a regular Windows update.
For now, though, you need to open Windows Update, where KB5095093 should be waiting for you, ready to download and install. If it isn’t, you can check for updates. If it still doesn’t show up, there’s one more place to look. Open Windows Update, then go to Advanced options > Optional updates. KB5095093 should be available to install there. If it isn’t, you’ll have to wait for Microsoft to roll out the Preview Update KB5095093 to your PC.
Once you’ve installed the update and rebooted your PC, open Windows Settings and go to System > Recovery. A new option labeled Point-in-time restore should be there. Click View or edit to open its settings. Once there, you’ll be able to enable the feature manually if your Windows volume is smaller than 200GB. If it’s larger, point-in-time restore will be enabled automatically.
As for the other settings, the only one you can adjust is Restore point disk usage. The other two options—Restore point frequency and Restore point retention—are available only on Windows 11 Enterprise editions. For us regular users, the two options are locked to Every 24 hours and 72 hours, respectively.
To restore your PC to a previous restore point created by point-in-time restore, you’ll need to launch Windows RE (Windows Recovery Environment). If your PC fails to boot, Windows RE should launch automatically after a few failed boot attempts. You can also launch it manually either by holding Shift while clicking Restart, or by opening Settings, going to System > Recovery, locating Advanced startup, and clicking Restart now.
Once you’re in Windows RE, you can initiate the point-in-time restore process by selecting Troubleshoot > Point-in-time restore. The next step is entering your BitLocker recovery key if your system volume is protected with BitLocker (mine isn’t, so I didn’t have to enter it). After that, select a restore point, review and accept the risks and limitations, and click Continue. Finally, review the settings and click Restore to begin the recovery process.
- What’s included?
-
Device encryption, find my device, firewall and network protection, internet protection, and more
- Brand
-
Microsoft
Upgrading the operating system for your PC can be simple with Windows 11 Home; it offers a simple, fast, and intuitive interface for ease of use.
I’ve already replaced System Restore with point-in-time restore
If you ask me, point-in-time restore is an excellent feature because it’s integrated into Windows Settings, is enabled by default, and requires minimal user input (be sure to enable it manually if your system volume is smaller than 200GB, though). Another major advantage is that its restore points include user files, something System Restore doesn’t offer.
Personally, I’ve already disabled System Restore and will be using point-in-time restore from now on. That said, if you prefer creating restore points manually or protecting partitions other than your system partition, you should stick with System Restore.






