How I turned my old Android phone into a dashcam for free – in 5 easy steps


How I turned my old Android phone into a dashcam for free - it's easy

Elyse Betters Picaro / ZDNET

Follow ZDNET: Add us as a preferred source on Google.


ZDNET’s key takeaways

  • An old Android phone (or iPhone) can work as a free dashcam.
  • Dashcam apps enable loop recording, GPS, and timestamps.
  • A solid mount and charger help the setup to work best.

I don’t review phones as much as I did at the start of my tech journalism career, but at one point, I was flipping between two or three devices a month. So, today, I have a lot of old Android phones and iPhones stashed away in forgotten totes. Lately, though, I’ve been repurposing some of them. I even turned a spare Pixel into a security camera. That got me thinking: Can a phone be a dashcam?

Also: How I turned my old Android phone into a streaming stick for free – in 6 easy steps

Turns out, it’s possible and free if a few accessories, such as a phone mount, are already on hand. Obviously, a dedicated dashcam is the cleaner long-term solution for most drivers, but as a free weekend experiment, my old Android phone works surprisingly well.

How I turned my phone into a dashcam for free

What you’ll need: For this setup, I used a Pixel 9a phone, a USB-C charging cable, a car charger, a windshield or dashboard phone mount, and a free dashcam app from Google Play. I used Droid Dashcam because it supports loop recording.

First, I decided to treat my Pixel like a single-purpose device. A phone-turned-dashcam does not need Snapchat, work email, photos, games, or 47 notifications from apps and services. So, I backed up anything important and factory reset the phone. Then, after setting up the phone again, I removed all unnecessary apps, turned off notifications, and enabled Do Not Disturb.

  • To factory reset an Android phone, go to Settings > System > Reset options > Erase all data.
  • To remove any unnecessary apps, press and hold the app icon, tap App info, and select Uninstall.
  • To turn off notifications, go to Settings > Notifications and disable everything, including lock-screen notification previews.
  • To enable Do Not Disturb, go to Settings > Notifications > Do Not Disturb and turn it on.

The goal? One phone with one job and no pop-ups or notifications interrupting recording.

Also: I looked into OBD2 fuel savers, and found a much safer solution to save car gas instead


Show more

Wipe the phone and keep it single-purpose

Elyse Betters Picaro / ZDNET

Next, I looked for a dashcam app in the Google Play Store, preferably free and with all the features I wanted. While a regular camera app can record video, it’s not great for driving. A dashcam app can record in loops, cap local storage use, add time and GPS data, and keep recording when needed. I did a bit of research and settled on Droid Dashcam.

After installing the app, I granted permissions for the camera, mic, location, and storage. In Settings > Video Settings, I set the video quality to 1080p instead of 4K. This saves on storage and may help prevent the phone from overheating during use. Remember, on longer drives, besides storage, heat is one of the biggest things to watch, especially if the phone is in direct sunlight.

Also: How I turned my old Android phone into a Wi-Fi extender – and fixed dead spots at home

I also set up my files to save to a specific folder on my device.

Unfortunately, the one feature Droid Dashcam doesn’t have, from what I could find, is a parking mode, which would turn my phone into a 24/7 car security camera. Another app, called DriveSight, uses AI-powered motion detection to guard my vehicle and can even upload clips to Google Drive, so footage is backed up there. But it costs $4.99 a month.

To keep things free, I’m using Droid Dashcam and plan to turn off the phone when parked so it doesn’t die fast.


Show more

Install a dashcam app

Elyse Betters Picaro / ZDNET

Loop recording is what makes an Android phone work like an actual dashcam. Without it enabled, the phone eventually fills up, hits storage capacity, and stops recording, defeating the whole point. In Droid Dashcam, I enabled loop recording under Settings > Recording Settings. That way, once the app reaches my storage limit, it deletes older clips and can keep recording. Perfect.

Also: 13 Google Photos settings I always change on every new device – and why

Also, while in Recording Settings, I set my clips to save as short chunks (5 minutes) instead of a single massive file, which should make them much easier to share with insurance, law enforcement, or even on social media. We’ve all seen viral dashcam incidents.


Show more

Turn on loop recording and set video duration

Elyse Betters Picaro / ZDNET

One thing I like about Droid Dashcam is that it offers several informational overlays, including the date, time, GPS, and speed. But they need to be enabled under Settings > Interface > Buttons on the screen. A standard video may show a car cutting across a lane, but a video with the time, location, speed, and other details provides more useful context.

It’s really worth digging through all the other settings … because there are many. If the phone does not have a network connection, for instance, Droid Dashcam can be set to gather location data from GPS only under Settings > Location (GPS).

Also: After years of using Android Auto, these are the 8 phone cooling tips I swear by

Back in Settings > Video Settings, Day/Night auto mode can be enabled so the camera automatically switches at sunrise and sunset. In Recording Settings, the G-shock sensor can be turned on to lock video from being auto-deleted or overwritten after an impact is detected. The sensitivity of the G-shock sensor can even be adjusted.

So, again, look around and turn on the features that matter most. One feature I made sure to switch on is Autostart recording, so that once I open the app, connect my phone to a charger, or connect to Bluetooth, Droid Dashcam will start recording.


Show more

Customize settings

Elyse Betters Picaro / ZDNET

So far, everything in this process has been free, but if a phone mount isn’t already available, sorry, it will cost extra. Don’t try to MacGyver this to save a few bucks. A shaky mount makes even a good phone camera look terrible, and a badly placed phone can obscure the view. I’d use a basic mount and place it high on the windshield near the rearview mirror.

Also: 11 cheap car gadgets that upgrade your daily commute instantly

That’d give a centered view of the road while keeping the screen mostly out of line of sight. I’d angle the camera slightly downward too, so the frame included the hood, the road, traffic lights, and both lanes ahead.

Recording video, using GPS, and keeping the screen active will drain any phone fast, so I also recommend plugging it into a USB-C car charger and routing the cable along the dash to keep the setup as neat as possible. Most people likely have a spare USB-C cable, but you may need to buy a car charger. Anker has one for $11.


Show more

Mount the phone and keep it plugged in

iOttie / Anker

My experience so far

Before driving, I recorded a 30-second test clip in the driveway. Then I checked whether the horizon was level, whether the windshield glare was awful, and whether the mount vibrated. Once I was good to go, I launched Droid Dashcam on my Pixel, drove around town, came home, and checked the footage. The video was smooth, the GPS and timestamps seemed accurate, and the audio was clear.

Also: 6 Android Auto apps I wish I discovered sooner, because they make driving much easier

Sure, my exact setup is not as polished as a dedicated dashcam, especially when it comes to parking mode and managing battery life, but for a free setup, it works great. I now have a workable dashcam, and my old phone has a second life. It automatically records high-quality video and audio of my drives, and I honestly think it’s good enough for occasional or backup use.

Can I use my iPhone as a dashcam?

Yes. An iPhone can work well as a dashcam — with a dashcam app, a sturdy car mount, and a charging cable. Apart from Droid Dash Cam, I also saw Driver and Smart Dash Cam in the Apple App Store. They’re all highly rated options.

Droid Dashcam is free to use, but you can pay to remove ads. 

Do I need cell service to use my Android as a dashcam?

No. Recording video does not require cellular service. GPS can still work without a data plan, although cloud backup may be limited.

How much storage is required?

I would say at least 32GB of internal storage for dashcam footage. More storage means more saved driving time, but loop recording can automatically replace old clips. Just be sure to quickly save a clip should an incident occur, so you don’t lose the footage forever.

Should I leave audio recording on?

Why not? I left it on for my test drive.


Show more





Source link

Leave a Reply

Subscribe to Our Newsletter

Get our latest articles delivered straight to your inbox. No spam, we promise.

Recent Reviews


Microsoft has spent the last several years pushing Copilot and new user interface designs, which has meant that several great features included with Windows don’t get the recognition that they deserve. These are some of my favorites that will run on any Windows 11-compatible PC.

Clipboard history remembers everything you copy

Win+V replaces one of the oldest frustrations in computing

Windows’s default clipboard has been a source of minor but constant annoyance: it holds exactly one thing. If you copy something new, the previous item is wiped out. It is enough of a problem that multiple third-party apps were created to address the shortcoming.

Now, Windows has Clipboard History built in, though it isn’t enabled by default. To turn it on, press Windows+i, then navigate to System > Clipboard, and click the toggle next to Clipboard history.

Once it is enabled, you can press Win+V to view up to 25 items in your clipboard history, including text, images, and links.

If you have specific pieces of information you use daily—like an email signature, a common code snippet, or a home address—you should pin up some of those items. Pinned items persist between system reboots and clipboard history clears, which means you never have to hunt to find something when you need it.

You can even enable sync in the Clipboard settings, allowing your copied text to follow you between different PCs signed in to the same Microsoft account. Once you get into the habit of using Win+V, the standard copy-paste function will feel useless by comparison.

Voice typing actually works now

Win+H lets you write with your voice

Notepad with Windows Voice Typing popup visible.

Windows dictation software has a reputation for being clunky and difficult to use, but that isn’t the case anymore. Thanks to the improvements in AI that we’ve seen since 2024, voice typing accuracy has improved significantly, especially for technical vocabulary. You don’t have to spend your time manually fixing formatting either. The tool supports punctuation commands like “period,” “new line,” and “question mark,” which prevents your text from turning into a rambling mess.

To use voice typing, press Windows+H anywhere there is a text field.

While it isn’t a full replacement for high-end professional software, it is free, built-in, and more than good enough for long-form writing, taking down a sudden idea, or writing quick messages when your hands are full.

Snap layouts make window management effortless

Hover over the maximize button and pick a layout

Notepad with the Windows Snap Layout window visible.

You can manually drag windows to the edges of your screen to split your display up, but you’re doing more work than is necessary in most cases. Windows’ Snap Layouts allow you to instantly arrange your Windows into predefined halves, thirds, or quarters. Just hover over the maximize button on any window or press Win+Z.

One of the most practical aspects of this system is the Snap Group. If you snap a browser and a document side-by-side, Windows remembers them as a pair. When you Alt+Tab, you can bring the entire group back together.

Live captions transcribe any audio on your device

Real-time subtitles for anything you’re watching

You can enable real-time subtitles for any audio playing through your speakers by going to Settings > Accessibility > Captions, or by pressing Win+Ctrl+L. The audio is processed locally on your device; nothing is sent to the cloud, which is critical if you’re privacy conscious or if whatever you’re captioning demands confidentiality.

I’ve mostly taken to using it when it is too hot to wear my headphones. I can just toggle it on and keep watching without disrupting anyone around me.

There are some hardware requirements you need to meet. Basic same-language captioning works on any Windows 11 PC running 22H2 and up, but if you want real-time translation, you will need Copilot+ hardware with an NPU and at least Windows 11 24H2.


The NZXT Capsule Elite USB microphone sitting on a desk.


Windows 11’s voice typing convinced me to skip Wispr Flow and other premium apps

Windows lets me turn my rambling thoughts into notes without typing anything.

Dynamic Lock locks your PC when you walk away

Pair your phone via Bluetooth and your computer can lock itself automatically

I can’t count how many times I’ve stepped away from my PC only to think, “Dang, I forgot to lock my PC.”

Fortunately, Windows has an easy way to handle that automatically by pairing your phone with your PC. When your phone gets out of range (about 20 feet in my house, though your wall materials and layout will affect that), your computer will automatically lock after about 30 seconds. There is no need to install a separate app on your phone, the setup just uses the Bluetooth connection itself. While the 30-second delay means it isn’t a guarantee no one can access my PC, it does mean it won’t remain unlocked if I step away for a long time.

I especially like this feature when I’m working on my laptop in public.

You can enable Dynamic Lock by navigating to Settings > Bluetooth & devices and pairing your phone, then enabling Dynamic Lock in Settings > Accounts > Sign-in options.


Microsoft includes tons of great tools if you dig for them

These tools aren’t alone either. There are tons of practical tools buried in Windows, unappreciated and underutilized.

Each of these tools takes less than a minute to enable, but they can make a significant difference in your day-to-day workflow. It is worth the small investment of time to find them and set them up.

If you’re looking for even more advanced customization options, I’d recommend checking out Microsoft PowerToys. It gives you a huge range of fantastic tools that make Windows much more pleasant to use.



Source link