Hackers hijacked Brazil’s emergency alert system and sent ‘misanthropy’ to millions of phones



TL;DR

Brazil’s civil defense alert system was hacked, sending fake extreme alerts with the word “misantropi4” to millions of phones before the platform was shut down.

Hackers breached Brazil’s national civil defense alert system overnight, sending fake “Extreme Alert” notifications containing the word “misantropi4” to millions of mobile phones across at least seven states. The Civil Defense Alert platform was taken offline at 1:30 am on Saturday after the Ministry of Integration and Regional Development confirmed the intrusion.

The Federal Police has been activated to investigate. No timeframe has been given for when the platform will be restored.

The first unauthorized alert was registered around 11:40 pm on Friday, 19 June, in Paraná. Within hours, the same emergency sound, the type that bypasses silent mode and overrides whatever is on screen, reached phones in São Paulo, Rio de Janeiro, Brasília, Bahia, Pará, Mato Grosso do Sul, and Acre.

National Secretary of Protection and Civil Defense Wolnei Wolff told a press conference that 10 alerts were tracked across various Brazilian states, with most sent via Cell Broadcast and at least one via SMS. The total number of phones affected was not officially disclosed, though German outlet Ad-hoc-News reported an estimate of approximately 30 million people reached.

It’s difficult to say whether one or more people participated in this criminal act,” Wolff said. He added that the incident was “very bad for the system, considering that we are dealing with people’s safety when we issue the alert.

Phones displayed “Defesa Civil: misantropi4,” with the final letter “a” in the Portuguese word “misantropia” replaced by the number 4, a substitution common in leetspeak. Misantropia translates to misanthropy, meaning hatred or aversion to humanity.

No dangerous instructions accompanied the message, but the use of the most severe alert category, which is reserved for imminent natural disasters, caused widespread alarm. Recipients across seven states were jolted awake by the emergency sound.

Wolff confirmed that the attackers managed to regain access after an initial blocking attempt. The platform was ultimately shut down entirely at 1:30 am The system will remain suspended until all digital security conditions are re-established, according to the ministry.

Brazil’s Cell Broadcast system is relatively new. It was mandated by telecommunications regulator Anatel in 2022, piloted in 11 cities beginning in August 2024, and expanded to cover the entire national territory by October 2025.

The technology broadcasts alerts to all devices within a cell tower’s range without requiring phone numbers or prior registration. The four operators that deliver the service, Algar, Claro, TIM, and Vivo, were involved in the overnight response alongside Anatel.

The vulnerability exploited in the attack has not been publicly disclosed, and the investigation is ongoing. Security researchers have noted that Cell Broadcast systems globally lack cryptographic authentication, meaning devices cannot independently verify whether an alert was genuinely sent by civil defense authorities.

Academic research since 2019 has demonstrated that fake alerts can be transmitted using relatively inexpensive equipment, including software-defined radios. Whether the Brazilian attack exploited the central platform, as the government’s statement implies, or used a clandestine transmitter remains unclear.

A person claiming responsibility for the attack posted on X (formerly Twitter) before the posts were removed by the platform, according to Brazilian tech outlet TecMundo. The Federal Police has not confirmed whether this individual is a genuine suspect.

The incident echoes a pattern of critical infrastructure alert systems being compromised through surprisingly basic attack vectors. In Taiwan last month, a 23-year-old student triggered emergency braking on four high-speed trains using a laptop and a cheap software-defined radio, exploiting cryptographic keys that had not been changed in 19 years. The European Commission was breached in March through a poisoned open-source security tool, resulting in 92 gigabytes of stolen data.

The immediate concern for Brazil is the erosion of public trust. The Cell Broadcast system was built to save lives during floods, landslides, and severe weather events.

If citizens learn to associate the emergency sound with pranks rather than genuine warnings, they may ignore future alerts when a real disaster is unfolding. That risk, more than any technical vulnerability, is the lasting damage of a hack that woke up a country with a single strange word.



Source link

Leave a Reply

Subscribe to Our Newsletter

Get our latest articles delivered straight to your inbox. No spam, we promise.

Recent Reviews


Most Mac users see Apple Preview as only an app to view images, PDFs, and other documents. That’s it. If that sounds like you, you are leaving a lot on the table, because Preview has quietly grown into one of the most capable apps on macOS, and it’s available for free.

I use the app daily to edit images, markup and sign PDFs, redact information, and so much more. So let me walk you through seven things you probably didn’t know Apple Preview could handle.

You can rearrange, combine, and pull out PDF pages

If you regularly work with PDFs, this one will save you a ton of time. Preview lets you easily rearrange pages in PDFs, combine multiple PDFs into one, and even extract specific pages from a PDF. 

To perform any of these actions, first you have to enable the thumbnail view. To do this, open a PDF file in Preview and go to View → Thumbnails or hit the keyboard shortcut ⌥⌘2 to reveal the sidebar. From here, you can click and drag pages to rearrange them in any order you like.

You can also drag a selected page out of the sidebar directly onto your desktop, and it will save those pages as a new PDF. No need for any extra software. 

You can also drag a PDF document or pages from other PDFs inside another PDF to merge them

Stop people from snooping on your PDFs

If you are sharing a sensitive PDF with someone and you don’t want anyone else to read it, you can lock it using Preview so only people with the correct password can open it. 

To do this, open your PDF, click the info button in the toolbar, find the security lock icon under Permissions, and click the Edit button. 

Now, check the box to require a password to open the document, set your password, and save the changes. You can even control what others can do without the password, like allowing them to print the file, but nothing else.

Another way to hide information is by redacting it. It permanently obscures the information so no one can read it. Note that once you save a redacted document, even you won’t be able to get the information back so ensure to create a copy of the original document before redacting it. 

To redact a document, open the Markup toolbar and click on the Redact tool. Now, you can highlight any text or just select an area to redact it. 

Read PDFs at night without burning your eyes

This one is a recent addition and an incredibly useful one. If you use your Mac in dark mode, Preview now has an option to match that for your PDFs. Go to View → Use Dark Appearance for PDF, and the blinding white background flips to a dark background that’s much easier on the eyes. Just keep in mind that this option only shows up when your Mac is already set to dark mode.

Remove image backgrounds without a third-party app

Preview also offers several image editing tools. Out of all the editing tools, my favorite is the one that lets me remove an image’s background. Yes, you don’t need Affinity or Photoshop to remove a background from an image

Preview can do it. Open an image, go to Tools → Remove Background, or hit the keyboard shortcut ⌘⇧K. As you can see in the image below, Preview has done a great job of removing the background and cutting out the subject. 

Open any image you just copied

Here is a little trick I use all the time. If you copy an image to your clipboard, you don’t need to paste it into a photo editing app to save it. Just open Preview and go to File → New from Clipboard or hit the keyboard shortcut ⌘N. Your copied image opens instantly, ready for you to edit, resize, or export.

Mark up screenshots and PDFs like a pro

The markup toolbar in Preview is genuinely great for quick edits. You can draw circles or rectangles to highlight something, add text, draw arrows, and even drop in your signature. 

While CleanShot X handles all my screenshot annotation needs, Preview is the app I use to markup my PDFs. And if you don’t deal with dozens of screenshots every day, Preview’s built-in functionality will be more than enough for you. 

Bonus tip: extract high-quality app icons

I don’t know who will need this feature, but I use it regularly, so I am sharing this as a bonus. Sometimes I need to use app icons to create images (like the one you see at the top of this article). 

If you have the app already installed on your Mac, you don’t need to hunt for the icon image on the web. Just go to the Application folder in Finder, select the app, and copy it. 

Now, launch Preview and use the “New from Clipboard” option, or use the ⌘N keyboard shortcut to open the app icon as an image in Preview. Now, use the ⌘S shortcut to save it to your desktop. 

Apple Preview is more than just a viewer

The point is that Apple Preview is genuinely powerful, and it’s sitting right there on your Mac, completely free. Whether you are managing PDFs, editing images, or trying to keep a late-night reading session from blinding you, Preview has you covered. Give it a proper chance, and I think it will earn a permanent spot in your workflow.



Source link